Magray :)

[BirdFanatic]

So i got a magray go kart hehe i like it came with sooooo many parts.it has a running yamaha kt-100 came with starter extra wheels many wheels tons of stuff ill take pics its from the 80s and has a stamp in the yolk i seen it

 

[BirdFanatic]

SR949 is the model number oops margay not magray

 

[John551]

 

[BirdFanatic]

I Gave the serial number ?

 

[itsid]

Cameron..

what is this thread about??

I don't get it you have a kart okay.. a Margay.. SR most likely... AND???
do you ask a question?, if: "WHAT QUESTION??!"

if not.. post pics... then it's at least a show up...

Other than that, it's the most pointless thread in this forums category so far.

'sid

 

[BirdFanatic]

Sorry it has taken so long i was updating you but did not have time to post pics was going out to dinner .Then when i was doing the photos computer froze and sayed un responsive plug in -.- had to start all over .
HaHa i did it

 

[BirdFanatic]

Stock bore lol thats the funny part and the guy gave me some back ground on it .
lol on the back

 

[itsid]

congrats.. that is a nice kart you have..

be careful with it.. that's all expensive stuff you have there;
if you want to keep it at a high value, don't ruin anything.

DO NOT paint the chassis!
that appears to be the original powdercoat.
clean it as good as you can, and use emory cloth to remove rust, then OIL to prevent further rust

(I assume you want to flip it... as usual)
That way the new owner KNOWS it's state and since it looks to be in decent condition
.. no need to cover it in paint

Same thing for the wheels.. clean them up as good as you can, and assemble them properly (do not crack the centers or bent the rims ),
but not the spares; they're disassembled for a reason

finding replacements is hard or expensive.. or both

'sid

PS nice kart.. I'd get it off your hands in no time if I were closer.

 

[BirdFanatic]

congrats.. that is a nice kart you have..

be careful with it.. that's all expensive stuff you have there;
if you want to keep it at a high value, don't ruin anything.

DO NOT paint the chassis!
that appears to be the original powdercoat.
clean it as good as you can, and use emory cloth to remove rust, then OIL to prevent further rust

(I assume you want to flip it... as usual)
That way the new owner KNOWS it's state and since it looks to be in decent condition
.. no need to cover it in paint

Same thing for the wheels.. clean them up as good as you can, and assemble them properly (do not crack the centers or bent the rims ),
but not the spares; they're disassembled for a reason

finding replacements is hard or expensive.. or both

'sid

PS nice kart.. I'd get it off your hands in no time if I were closer.

Sorry if spelling bothers you and the punctuation i am excited to much to care .
There are sooo many parts i have not even been able to go through the 4 boxes of stuff and the kart is in great shape engine has oil on the exhaust but its a 2 stroke and its stock he said its from alaska where they used to have races for them but stopped and everyone left so this was a friend of his (the man i bought it from ) they used to race together when the owner of the kart i just bought it from (lets call him mike ) Sold his kart he soon found he wanted one again a few years later he got back in touch with the original owner and asked his if he still had it he said he did in storage so mike bought it in the late 90s mike who had wanted to get back into racing took it to open track but other then that he told me there where not many races available in California at the time for it .He then put it in his garage the proper way to store a kart .and took it out 6-8 months ago to go race it at open track again for memories.
(He must not have cared to much and had lots of money he lived in a 4 bedroom (one bonus room) 5 bath 8000 square foot house with 1 acre of land on top of san dimas mountains in his garage he had 2 Prius's and one 1998 corvette said he was a engineer for the oil company ) i bought it all for 250$ lol so i dont think he thought it was worth much i got a steel (Thanks mike)

 

[BirdFanatic]

Never even mounted the fairing

 

[itsid]

Sorry if spelling bothers you and the punctuation i am excited to much to care .

What.. are your trying to p155 me off now?
I haven't complained, have I?
Still you throw that at me...

Well, in that case...

If you don't care enough to type,
what makes you think we care enough to READ!??


As far as I'm concerned, you just disqualified yourself again...
good luck getting off my ignore list anytime soon.

'sid

 

[BirdFanatic]

What.. are your trying to p155 me off now?
I haven't complained, have I?
Still you throw that at me...

Well, in that case...

If you don't care enough to type,
what makes you think we care enough to READ!??


As far as I'm concerned, you just disqualified yourself again...
good luck getting off my ignore list anytime soon.

'sid

that was not to you it was just for the people who are grammer nazi's because there are some on here .What year would you say it is .Mike said about mid to late 80s

 

[BirdFanatic]

That is a lot of sprockets all new there is 2 more sets of brakes and 2 more set of brand new never opened in the original package sprockets from Horstman.

 

[BirdFanatic]

congrats.. that is a nice kart you have..

be careful with it.. that's all expensive stuff you have there;
if you want to keep it at a high value, don't ruin anything.

DO NOT paint the chassis!
that appears to be the original powdercoat.
clean it as good as you can, and use emory cloth to remove rust, then OIL to prevent further rust

(I assume you want to flip it... as usual)
That way the new owner KNOWS it's state and since it looks to be in decent condition
.. no need to cover it in paint

Same thing for the wheels.. clean them up as good as you can, and assemble them properly (do not crack the centers or bent the rims ),
but not the spares; they're disassembled for a reason

finding replacements is hard or expensive.. or both

'sid

PS nice kart.. I'd get it off your hands in no time if I were closer.

Thank you sid .

Let me demonstrate how to post a pic...
Pic fits the situation well too...

How did you make in the little box ?
(on another note i made a mutli post for the first time correctly )

 

[Young One With A Manco]

I read the rules!!!!!

 

[Half-breeder]

I read the rules!!!!!

no... you read/REMEMBER/... and APPLY the rules... but that probably has something to do w/ upbringing.

 

[BirdFanatic]

I read the rules!!!!!

I searched it and only found this
http://www.diygokarts.com/vb/showthread.php?t=20169&highlight=picture+posting

 

[Young One With A Manco]

Im sorry here...
BUT CAN YOU THINK BEFORE YOU ACT!!!!!!!!!!!!!!!!!!!!
Clicked on your link... Literally (i counted because i knew stupidity was involved) 4 seconds later and i was here;
http://www.diygokarts.com/vb/showthread.php?t=19607

 

[BirdFanatic]

Thank you It Worked Well i cant wait to put the new fuel line on the kart and a new filter so i can start it up again . I was shocked when i opened one of the boxes and found that there is a whole rebuild kit for the entire engine inside.

 

[Young One With A Manco]

Note to mods- lets leave these posts... Because clearly something was learned... So why delete them?