Looking for Help Identifying this go kart

Status
Not open for further replies.

ZR2Chevy22

New member
Messages
20
Reaction score
0
Location
Kemah, TX
Hey Guy's and Gal's,

I bought this go kart the other day and was curious as to the maker. I'm trying to find all the information I can about it. It has a Briggs and Stratton fun power 5hp engine. Runs 18x9.50-8 rear tires and 15x6.00-6 front tires.

Any help would be greatly appreciated. i have searched high and low and can't for the life of me figure out the maker. I can see it had a roll cage at one point but it's no longer with it.



 

Joe-405

Enjoying New Projects
Messages
2,673
Reaction score
98
Location
U.S.A.
It looks like a dingo. I used to have one. Mine would do wheelies when I power braked it. It was very fun.
 

ZR2Chevy22

New member
Messages
20
Reaction score
0
Location
Kemah, TX
Joe I think that's it. I believe it is an older Manco Dingo without the roll cage. I found some with the same frame shape but with roll cages and they have the same tire/wheel setup. Now that I'm headed in the right direction will be easier to find.

Thanks,
Andrew
 

firemanjim

Just kartin' around....
Messages
5,247
Reaction score
88
Location
Houston Texas
That's not a dingo..... Google dingo and see if you see ANY frames that look like that one. I'm gonna stick with carter for now. I had one similar to that, with a "roll bar". I still have the nose to top hoop and the top hoop I think....
And that front end looks a lot like a carter set up....
 

ZR2Chevy22

New member
Messages
20
Reaction score
0
Location
Kemah, TX
There's another member on here that I found that has the same frame his handle is outcrydrummer I believe. I found the kart using google images. I sent him a PM looking for insite. If he's still active that's a different story.

We shall see.
 

ZR2Chevy22

New member
Messages
20
Reaction score
0
Location
Kemah, TX
OK on further research and going through thousands and thousands of google images I came across THIS. it appears to be a Ken-bar Streaker without the roll cage. They offered many engine options also.



Andrew
 

firemanjim

Just kartin' around....
Messages
5,247
Reaction score
88
Location
Houston Texas
Yep yep.... That tis it..... And that is a shot of Discount Go Karts of Texas.... My favorite shop in town....
 

ZR2Chevy22

New member
Messages
20
Reaction score
0
Location
Kemah, TX
Where in Houston are you located firemanjim? I'm located in Kemah, TX and work for Galveston County SO. Guess we both have public service in mind with the line of work we are in.

Andrew
 

firemanjim

Just kartin' around....
Messages
5,247
Reaction score
88
Location
Houston Texas
Landuse, cause it's da bomb...... LoL they are just great peeps over there. Friendly,don't try to over sell, won't sell you something they KNOW you don't need, give free advice.... Can't go wrong by stopping by this place......
Chevy, I live over here by pearland, 288 @ blt 8.... I'm a vol fireman. I work full time as a cnc machinist for the oil industry. Being a v fireman is great. I get to ride around and put out fires and help people in need of emergency medical attention, and hang out with the local SO's...... Let's me forget what problems I may have at the moment, and let me get a different perspective on it, and life in general. I have always been a giver. If you can't give, you can't live...... (freely)
 

ZR2Chevy22

New member
Messages
20
Reaction score
0
Location
Kemah, TX
I know the feeling.. I've been in law enforcement for 11 years now. It's a job you do because you love not because you'll get rich doing it. It's countless hours of helping people sometimes without even so much an acknowledgement or anything.

Andrew
 

firemanjim

Just kartin' around....
Messages
5,247
Reaction score
88
Location
Houston Texas
Both my bros are cops in another state. Heard tons of stories..... LoL
And get a thank you? Please..... Not from very many..... O and how bout running hot and some idiot won't get out of the way. It don't matter if I'm going POV (got more siren than you (lol) and lights) or in the BIG red truck....
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
I know the feeling.. I've been in law enforcement for 11 years now. It's a job you do because you love not because you'll get rich doing it. It's countless hours of helping people sometimes without even so much an acknowledgement or anything.

Andrew

OMG! !!!!! The law! ..Ummmm- I just remembered something I need to take care of down Mexico way. .....

Andrew- could you please fill out your profile so we know where you are from when you post in the future. ....

Welcome to the forum and it's always good to have another Texan aboard as those pesky Canadian folk are giving us a run for our money on members. ....
 

ZR2Chevy22

New member
Messages
20
Reaction score
0
Location
Kemah, TX
There better? I made the account last night at work :rolleyes: so I didn't have the time to fill out all the details but they are done now.

I am off Wednesday and Thursday so I'm hoping to tear into the go kart. Engine will be first then once I either fix it or get pissed and decide to replace it then the kart will get torn down to just the frame, sanded, spots rewelded then primed and painted. I'm planning on using that rustolem hammered finish paint now just to decide on a color.

Andrew



OMG! !!!!! The law! ..Ummmm- I just remembered something I need to take care of down Mexico way. .....

Andrew- could you please fill out your profile so we know where you are from when you post in the future. ....

Welcome to the forum and it's always good to have another Texan aboard as those pesky Canadian folk are giving us a run for our money on members. ....
 

firemanjim

Just kartin' around....
Messages
5,247
Reaction score
88
Location
Houston Texas
Hey, going to my storage tonight to look for some wheels for half-breeder. I'll see what's left of the cage I got. Maybe you can use it... BUT now that I think about it, it might have been off one of the single I had. I'll check it out and pm you on that. It'll be free, if it's there.....
Hey you can't go wrong dropping a $100+ on a predator 212cc 6.5hp from harbor freight..... It's a beast, and you can punch 9+hp out of it for less than $100....
 

ZR2Chevy22

New member
Messages
20
Reaction score
0
Location
Kemah, TX
Sounds good. Since the main use of this Kart will be for my nieces and nephew that would be good. I'm installing a gas pedal limiter as well as a remote kill switch where the motor can be killed from my RC transmitter. I have gas a 1/5th scale gas powered RC car I put a kill switch on so it should be the same principal setting it up on the Briggs.

Andrew



Hey, going to my storage tonight to look for some wheels for half-breeder. I'll see what's left of the cage I got. Maybe you can use it... BUT now that I think about it, it might have been off one of the single I had. I'll check it out and pm you on that. It'll be free, if it's there.....
 

ZR2Chevy22

New member
Messages
20
Reaction score
0
Location
Kemah, TX
The Predator 212 is what I put on my Baja mini bike. Talking about holding on for dear life. Even with the gov still active on it it's a white knuckle ride for most people. You're right you can't beat them for 100 bucks.

But if you do remove the gov it's recommended to upgrade the flywheel, piston and crank with billet parts to avoid injury. I've seen first hand on a buddies mini bike what happens when the stock flywheel on the predator 212 decides to grenade when the gov's removed.. Not a pretty sight.

Andrew

Hey you can't go wrong dropping a $100+ on a predator 212cc 6.5hp from harbor freight..... It's a beast, and you can punch 9+hp out of it for less than $100....
 

firemanjim

Just kartin' around....
Messages
5,247
Reaction score
88
Location
Houston Texas
Yep yep.... Gotta keep the kiddos safe. They sell cheap remote kill kits for karts/atvs for like $50.... I'll find a link..... I think they are good for 200-300 feet though....
 
Status
Not open for further replies.
Top