Looking for a clutch/torque converter.

[7r1f0rc3]

I have a Honda gx270, which if you are not familiar with it, has a 3/4” bore and outputs 9 HP and 15 ft-lb of torque. I need a suggestion (preferably #35 chain and is under $50) for a centrifugal clutch or torque converter.

 

[Texan]

The 30 series torque converters on ebay are about $55. But are only rated up to 8hp. You need a 40 series, unfortunately you will not find one for the price of a 30 series.

 

[7r1f0rc3]

The 30 series torque converters on ebay are about $55. But are only rated up to 8hp. You need a 40 series, unfortunately you will not find one for the price of a 30 series.

Oof $70 any centrifugal clutches? They engage at lower rpm and are smaller. Issue with torque converters is that the 40 series is literally too long for my setup.

 

[Tpdingo]

We need pics of the kart and your application(running around a parking lot, going up and down hills on pavements, smooth grass, offroad grass, monster trucking, etc.)