Location of engine

Status
Not open for further replies.

Mrflyingdonut

New member
Messages
10
Reaction score
0
I have a golf cart im puting an engine on, it would be easy if I could put the engine behind the axle, I have a friend who says puting the engine behind the axle with sprocket on it will not work. Is this true, do I have to put the engine in front?

---------- Post added at 10:12 PM ---------- Previous post was at 09:58 PM ----------



Here's a pic of where I wanted to mount it

---------- Post added at 10:14 PM ---------- Previous post was at 10:12 PM ----------

http://i.imgur.com/tC9eSLg.jpg
 

Attachments

  • tC9eSLg.jpg
    tC9eSLg.jpg
    255.2 KB · Views: 11
Last edited by a moderator:

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
93
Location
COMFORT, TEXAS
It will Function just fine.
I do not know if it is best for weight balance etc.
But mechanically it is not an issue.
 

ezcome-ezgo

G'me sumthin to write on
Messages
5,990
Reaction score
2,994
Location
Atlanta, GA
I put one in my 92 Ezgo. As a proof of concept, it is bolted to the axle with muffler clamps. It sits behind the axle. It's an electric to gas conversion too. How many teeth on your differential socket?
 

Mrflyingdonut

New member
Messages
10
Reaction score
0
I put one in my 92 Ezgo. As a proof of concept, it is bolted to the axle with muffler clamps. It sits behind the axle. It's an electric to gas conversion too. How many teeth on your differential socket?

The sprocket I added is either 12 or 14 tooth, with 12 on the clutch. The ratio overall is about 12 to 1
 
Status
Not open for further replies.
Top