Sry all for screwing up my previous post. Thank you to those that tried to help anyway. Starting fresh:
Vehicle I'm looking at is a Manco Duece. I'm 200lbs and 6'4" so I need something larger like that. I proly won't be happy with a motor of 13hp or less, and buying a 15hp or larger horizontal shaft isn't cheap. I've got an unused Deere riding mower that I can take the motor and transaxle from. And not to be contrary, but a decently running 25hp 4 stroke isn't ready for the scrap heap. So I was going to use the motor and transaxle in the Manco (there's plenty of room back there). Transaxle will effect the required 90° drive train adjustment. I'll install cogs on the transaxle output shaft and Manco axle.
My questions are:
1. What torque converter would you all advise?
2. Should the torque converter be installed before or after the transaxle?
3. Considering that the transaxle (and its internal gearing) come from a riding mower, any wild guesses as to the two cog sizes for decent all round driveability?
Thanks all!
Sent from my SAMSUNG-SM-G935A using Tapatalk
Vehicle I'm looking at is a Manco Duece. I'm 200lbs and 6'4" so I need something larger like that. I proly won't be happy with a motor of 13hp or less, and buying a 15hp or larger horizontal shaft isn't cheap. I've got an unused Deere riding mower that I can take the motor and transaxle from. And not to be contrary, but a decently running 25hp 4 stroke isn't ready for the scrap heap. So I was going to use the motor and transaxle in the Manco (there's plenty of room back there). Transaxle will effect the required 90° drive train adjustment. I'll install cogs on the transaxle output shaft and Manco axle.
My questions are:
1. What torque converter would you all advise?
2. Should the torque converter be installed before or after the transaxle?
3. Considering that the transaxle (and its internal gearing) come from a riding mower, any wild guesses as to the two cog sizes for decent all round driveability?
Thanks all!
Sent from my SAMSUNG-SM-G935A using Tapatalk