KT100 help please!! :'(

[Codyabeast]

I have a KT100 engine on my kart, which is now direct drive. The motor has been freshly rebuild and everything looks just fine but since the kart is now direct drive i was trying to push start it today but cant get any spark to the spark plug (which is brand new) i tried 2 of them today, no luck. Any help would be greatly appriciated!

Thanks, Cody.

 

[Kaptain Krunch]

You dont need to make 2 threads, in the future one thread is enough

Have you checked the kill switch wires?

 

[Codyabeast]

My internet was pulling some funny business on me, sorry! But im pretty sure the kart has never had any type of kill switch.. The person i bought it from has always just pulled the spark plug off to stop it as far as i know

 

[Kaptain Krunch]

Pulling off the plug wire would get annoying after a while... Anyways...have you ever seen it run? if not it may have a bad cdi, stator, or coil. But first check all connections and make sure nothing is loose/grounding where is isn't supposed to.

 

[Codyabeast]

Nope never seen it run, i bought it with a cracked crank & had it shipped out to a gokart place by the name of Commet. They replaced the crank and a few other things they said needed to be replaced.. I took the cover off and looked at the stator (which ive had problems before on my dirtbike) but everything appeared to be fine. This could sound stupid but i honestly dont know what a "cdi" is nor would i know what looks right from wrong this is my first kart