Konker 140cc Pitbike Engine

Status
Not open for further replies.

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
I just bought a go kart frame and pit bike engine package (I really only wanted the frame). The engine is from a 2007 Konker 140. It's a four stroke, oil cooled single. Tranny is a four speed, I believe. I am beginning to think it's Lifan engine- Anybody know anything about these? I know that Lifan is one of the bigger names in clones. Any idea what name brand these are clones of?

I have found specs on the 'net that suggest from 11-12.5 hp for these.

The previous owner bought the kart frame as a means of giving the engine a new life. He said the bike ran beautifully, but the frame broke. It certainly did! I'll put up pics tomorrow- the frame's mangled! But he assured me it ran well.

After I got home from work today, I strapped the engine and frame remnants down and hooked up a temporary fuel bottle. A few kicks into it, it actually started! Woohoo! Looks like the carb's okay. Actually- the carb's a bonus- a 26mm Mikuni!

I'm going to have to nail down a sprocket and retainer, as wel as the exhaust mounting ring. These parts have been lost. If it's a Lifan, should be fairly easy to get.

I did get some other bike parts as well, including the front brake master cylinder and caliper, both rotors, and some miscellaneous bits.

Anyhow, the whole point of this description is to ask if you fine folks know anything about these? I wouldn't know a pit bike if it smacked me in the mouth. Any information specifically regarding the engine, manufacturer, specs, reviews etc. would be much appreciated. I did some searching, but didn't find a whole lot...

Pics to follow, tonight or tomorrow.
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
Hey, what did you end up doing with this engine? If you still have it would you consider selling it or giving it away? Im gonna visit my cousin up in ontario sometime next week and my dad said (after about weeks of convincing) that if we find anything we can take it back home..... :D

Oh yeah, now that i have my welder im looking to either make a pit bike, or find a cheap one and put an engine like this one in it... Lemme know.

Thanks
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Hey, what did you end up doing with this engine? If you still have it would you consider selling it or giving it away? Im gonna visit my cousin up in ontario sometime next week and my dad said (after about weeks of convincing) that if we find anything we can take it back home..... :D

Oh yeah, now that i have my welder im looking to either make a pit bike, or find a cheap one and put an engine like this one in it... Lemme know.

Thanks

I've got a local guy that as expressed some interest in it. He offered to trade me a 13hp clone with electric start for it. I'm buying some kart parts from him. As far as this engine goes, I hadn't really decided yet. His schedule and mine don't mesh very often, so it's all up in the air right now.

Whereabouts in Ontario will you be visiting?
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
I sent the frame to my scrap buddy. I am not equipped to weld aluminum, and a bunch of parts were missing off what was left of the frame, anyway.
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
so it turns out im not headed your way. I thought it was ontario but its actually montreal. lol

this is where were gonna be going Montreal-Nord, QC H1G 5V9, Canada

How far away are you from there?
 

sideways

Unfinished projects king.
Messages
1,501
Reaction score
2
Location
Perth, Western Australia
There's a million different Chinese motorbike engine manufactures (just like there's a million Japanese ones), Zongshen, Lifan and Ducar being the main ones we get here in Aus..... Never heard of Konker though! It's not a very confidence inspiring name! :roflol:

As far as I can tell, whilst they're generally the same basic architecture, each manufacturers engines are different in almost every. Don't expect parts to be interchangeable because they probably wont be. Measure and ask before buying anything.

Also, it's likely not a clone. Those laydown style ones are pretty unique but they certainly take their fair share of influence from Yamaha, Honda and Kawasaki motors.

I've never had any trouble with a Chinese bike engine, they seem much better put together than people give them credit for. Quite nice to ride too, they generally have lots of low down power so you can putt around on them a lot nicer than the higher performance Japanese offerings.

Forget the power ratings, they're all over the place. You'l find umpteen different ratings for the same engine, especially when a different manufacturer is using that engine in their bike (eg, my Atomik with a 250cc Zongshen engine).

Good luck with it, I think it'd make a great go kart engine, certainly 76453x better than an industrial engine! :thumbsup:

Thanks

Hayden
 
Status
Not open for further replies.
Top