Kohler 7hp torque converter

[Screamingreelsfishing]

What’s up guys . I recently purchased a go cart frame and have 7hp kohler command to go on it. Then I purchased a torque converter to put on it but I think the bolts to attach to motor are too big. Can I just go to a local hardware store to get the right size or so I have to special order?

 

[FlyFrog]

find out if its metric or sae, if the bolt hole in the tourqe converter is large and there is play up down side to side with bold in, make a sleeve for it

 

[karl]

Hardware store should have them, 5/16- 24 (fine thread) is what your after.

The kits typically ship with the wrong bolts, m8x1.25

Never force the bolts in, should hand thread!

 

[Screamingreelsfishing]

Hardware store should have them, 5/16- 24 (fine thread) is what your after.

The kits typically ship with the wrong bolts, m8x1.25

Never force the bolts in, should hand thread!

Awesome! I appreciate the info. I knew they had to be wrong size when they wouldn’t hand thread. I didn’t try to force. I’ll check out hardware store later today!