Title says it all, any of you do it? its got the little BS on-off switch. on the engine, but any idea how to wire up a kill switch on these things? like the switches you press once and it shuts it all down. I need it for erm, experimental reasons?
just make sure engine is ground to frame, then put a toggle or rocker (not a momentary) switch anywhere you want it, and run your wire to the kill switch on the motor, you can leave the factory one on and it will still work, you'd need to be sure both kill switches are "off" or you wont be able to start it
The 79cc Does not have the magic "gold box" so you have to use a Switch.
You can use a button, but it has to be held down till the engine dies completely. It could "diesel" and continue to run.
I spliced into the wire on TOP of the red on off switch. and installed a on off Switch.
If I recall it works kinda weird. Like the Red switch now has to be in the Off position all the time or my switch will not work.
Might have been better to splice the bottom wire on the switch.
Do you have a "Gold box" off another clone you can steal, and install on your 79cc?
Then you can use a kill button.
Read everyone's responses the day after on my phone, but never reply from my phone.. I just did the quick and dirty, and added a switch tapped into the spark plug.. and said screw it. works like this. no spark, no bang.