Karting in Florida

Yardsale

New member
Messages
17
Reaction score
1
Location
Riverview
I got a $200 basket case with tired 20yo, 5hp Briggs. There is no brand label.. I have a shed out back with a welder. Anyway, hey y'all
 

Yardsale

New member
Messages
17
Reaction score
1
Location
Riverview
Ok I got a harbor freight 212. Will need a + .20 billet rod. I figure a 265 cam, a jet kit, exhaust, flywheel, and air filter for starters.
 

Yardsale

New member
Messages
17
Reaction score
1
Location
Riverview
Ok I got a harbor freight 212. Will need a + .20 billet rod. I figure a 265 cam, a jet kit, exhaust, flywheel, and air filter for starters.
Gears are 6:1 but the clutch is going to be toast soon. Thinking about that cvt? Any suggestions, she wants to get me a Christmas present!
 

Yardsale

New member
Messages
17
Reaction score
1
Location
Riverview
First, does the 212 run and idle well? people make that mistake way to often
Hey FlyFrog, the 212 runs way better than the tired Briggs. The clutch fit and the 212 has the same mounting pattern. I'm impressed with the additional power!
 

Attachments

  • 20201106_194015.jpg
    20201106_194015.jpg
    679.5 KB · Views: 5
  • 20210226_192542.jpg
    20210226_192542.jpg
    600 KB · Views: 5

FlyFrog

Active member
Messages
467
Reaction score
133
Location
Kankakee Illinois
Thats good, I was just checking to make sure it ran well before you modified it and couldnt figure out why it wasnt running right.
 

Denny

Canned Monster
Messages
11,924
Reaction score
8,422
Location
Mayberry, Indiana
Just wanted to say “Hey”. :lolgoku: A CVT TAV II 30 series with a back plate would be a welcome addition to that kart. Just remember to use a Genuine Comet belt.
 

Yardsale

New member
Messages
17
Reaction score
1
Location
Riverview
I'm having problems with the #41 chain stretching, tractor supplies chain is good but who has a ligit chain?
 
Top