Is this a bad idea?

Status
Not open for further replies.

hornetkart200

New member
Messages
4
Reaction score
0
I have a honda gx200 which currently is still governed.
Instead of taking it apart to remove the govener I was wondering if I could get away with just hooking up the throttle directly to the govener arm which would then overide the govener giving it full power, however I hesitate because I am worried about engine damage. Will this damage the engine?
 

Badot

New member
Messages
677
Reaction score
2
First of all, I think you'd want to hook it up to the carb rather than the governor arm, or the governor arm would start pulling back on the cable when you start revving it.

The rest is another can of worms.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
First of all, I think you'd want to hook it up to the carb rather than the governor arm, or the governor arm would start pulling back on the cable when you start revving it.

The rest is another can of worms.

Yeah- what he said. FWIW, I do not think it is a good idea at all. Do a forum search on all things related to the governor, and you will find many opinions and theories, including my own. WAAAAY too much material for me to type in one post.
 
Status
Not open for further replies.
Top