is the 6.5 blue grey hound motor a gx200 clone?

[GoTeamWhatEver]

need to know what parts will fit my 6.5 greyhound motor, think it is a gx200 from what i have read on the net and on here. if any one know some info on this please reply. thanks and i just read i thank lifan makes the motor its just called greyhound...

jerremy

 

[anderkart]

Yep, its a copy/clone of a Honda GX200.

 

[Bluethunder3320]

the valve cover and gas tank are basically the only design differences. honda parts wont interchange with these.

 

[GoTeamWhatEver]

cool deal, also need to know some stuff about jets and emulsion tube. about the jets what size is the #92 jet in mm or decimal. and is the 140 emulsion tube the best one out there or is there more out there.

 

[GoTeamWhatEver]

ok ombwarehouse.com has jets for $2.10 on there website, that go by 7mm .028, 9mm .036, to .040.

and then affordablegokarts.com has them for $6.00. sizes run from #78, #80, #82, #85, #88, #90, #92, #95, #98.

so i ask how do i compare them in size. for instance what would the #92 jet be compared to from the jets on the ombwarehouse.com website?

 

[anderkart]

so i ask how do i compare them in size. for instance what would the #92 jet be compared to from the jets on the ombwarehouse.com website?

Check out the main jet info half way down this page:--> http://www.nr-racing.com/stockparts.htm

 

[GoTeamWhatEver]

great, i see why about the price difference to. drilled dont work as well so thats why they are so much cheaper, i am going to buy the 90, 92, and 95. just to see witch one works with my setup.

 

[dmaznic]

All of them are drilled out, where do you think the holes come from? It just matters how you'd drill it which could make it good or bad.

 

[r_chez_08]

I think the genuine Honda jets are reamed to size. However the tiny accurate reamers are very expensive.
You can buy a set of drills from harbour freight and drill them yourself. Cheap jets would be fine unless you are racing though.

Also, I am pretty sure the greyhounds have a different side cover.