Is it worth it?

Status
Not open for further replies.

Scottrods

New member
Messages
25
Reaction score
0
Location
georgia
I have a chance to buy a few old Briggs kart engines. I'm unsure of the exact specifics but I'm told one is a raptor 2. The guy is really clueless on what he has and really can't tell me much. The most he wants for one is 70 and he'll take a lot less for the less complete ones. He also has "boxes of parts" Is it worth it? I'm not sure if they run or not he doesn't know. Is it a good deal?
 

Attachments

  • IMG_0820.jpg
    IMG_0820.jpg
    347.6 KB · Views: 24
  • IMG_0821.jpg
    IMG_0821.jpg
    359.7 KB · Views: 19

Hellion

Staff Murderator
Messages
9,436
Reaction score
4,362
You know anything about these engines, I mean how to work on 'em, tear them down and build them back up?

If you do, they could be worth the price just for parts if you were a Briggs enthusiast. I would bet the majority of those are worn out with scored cylinders and minimal compression. Most kartists (?) have a stash of trashed engines that they cannibalize for parts....
 

Scottrods

New member
Messages
25
Reaction score
0
Location
georgia
You know anything about these engines, I mean how to work on 'em, tear them down and build them back up?

If you do, they could be worth the price just for parts if you were a Briggs enthusiast. I would bet the majority of those are worn out with scored cylinders and minimal compression. Most kartists (?) have a stash of trashed engines that they cannibalize for parts....

I know how to rebuild the engines. I'm just wondering is it worth the price even with the possibility of them being trashed. He says he was told 2 or 3 ran but he isn't for sure. I'm not an enthusiast by any means but I do know how to work on them.
 

Hellion

Staff Murderator
Messages
9,436
Reaction score
4,362
How much for all?

For me it would be worth it, but not in a monetary sense. I just like Briggs and other flathead engines.... and those photos make me drool.
 

itsid

Moderator
Staff member
Messages
11,563
Reaction score
260
Location
Ruhrpott [Germany]
true true.. 70 for an engine of unknown origin in unknown condition with unknown internals?

If that sounds like a good deal to you... well I have some random stuff you might be interested in ;)

No honestly.. if you know what you are dealing with,
(that means touching and inspecting a particular engine... knowing what to look for)
then 70 is okay for a used raptor that's slightly worn out
a fully worn down 5hp briggs flathead (even in running condition) is maybe worth half that.

IDK, it's your choice to make.. personally I'd say maybe 200 for the lot
(for enough parts to make at least 5 complete engines).

'sid
 

Scottrods

New member
Messages
25
Reaction score
0
Location
georgia
Ok update time. I went and I bought the entire lot. I got it all for 100 bucks. To me a pretty good deal. I have two definabtly buildable raptors, a bare raptor block, a completely trashed locked up raptor, two buildable basic 5 hp flatheads I think, and then a trash one. I got in the lot a lot of brand new parts too. I got atleast 5 new cams, around 20 valve springs, 8 stock carbs, two tillotson carbs, 2 new rods, a new .20 piston, new standard piston and a lot of new gaskets and rings. Overall I think a pretty good deal. :)
 

Attachments

  • IMG_0824.jpg
    IMG_0824.jpg
    402.7 KB · Views: 11
  • IMG_0825.jpg
    IMG_0825.jpg
    264.6 KB · Views: 4
  • IMG_0826.jpg
    IMG_0826.jpg
    235.5 KB · Views: 5
  • IMG_0827.jpg
    IMG_0827.jpg
    457.9 KB · Views: 9

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
For that lot at that price...if not a total briggs fan.... Could always sell the lot for a really good amount... Then buy the motor you really want, and put what ever you want into it..

None the less... That's a nice score...
 
Status
Not open for further replies.
Top