Invader restoration and Murray Kilowatt

[Gresendez18]

I know this is an older post but it pops up on most kilowatt searches so thought I’d try and post a little info, added grease fitting to all pivot points, duromax 440 18hp electric start, a cheap $105 tav40 from Amazon. Upgraded the 1.2 amp charging coil to 6 amp (claimed) dual charging coils and added a voltage regulator for a 13 volt at battery charging indicated, so should be able to run some led lights and still charge battery. More upgrades to come

Hello, any help on the driven pulley size and belt size. Coming of a 212

 

[OneTimeUser]

This is very similar to the project I'm starting. Murray Kilowatt with a 420 Predator. I got some ideas from your pics, thanks. What length belt are you running on the TC? Maybe save me some searching and/or trial and error ($). Thanks.

 

[midnightmaniac]

I recently started to rebuild a Murray kilowat
Any advice would be appreciated.

 

[Hellion]

Fellas, this thread was someone else's (abandoned) Project Log and is not the place for all Murray Kilowatt content. I don't know where the original poster Voodoo Rufus is or if he finished his kart but he may return to this thread in the distant future and I will be happy to unlock it for him.

If you want better engagement with your posts, make a new thread with your own title. And post photos!