I'm so bit.

Status
Not open for further replies.

Bbqjoe

Banned
Messages
3,455
Reaction score
70
Location
Location, Location
After buying my Warrior, delving into the clone, and making some mods, I've been bit severely.

I have a 420 Briggs and Stratton that I'm thinking about modding the daylights out of.
First I think I think I'll bore it out 10% over, change the cam, pull the governor, port the head, get some titanium rods, lifters, and rockers.

Then I'll put in a longer billet rod along with a billet flywheel. I'm going to add a Mikuni carb, and a double barreled shotgun exhaust.

Then I'll have the crank balanced, and put on a stronger starter.
I'm also going to have the head ground, and go with a thinner gasket, and bring that piston right up to the deck and then some.

I'm also looking at adding on ram charger of some sort.


I just can't help myself. I see this engine, and I get a tingle in my bones, and I just have to do it! My wife thinks I'm crazy, and my shrink says I'm obsessed.




Do you think this is wrong to do to my generator? :D
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
:smiley_omg: OMG!
Sounded good till you said Generator!

I guess you could Power Fort Joe Even FASTER! and Brighter!:lolgoku:
 

Jfive

New member
Messages
645
Reaction score
1
Location
Great falls Montana
You had me till the titanium rod. No one uses ti anymore? It's to expensive and hard to machine. Now if you where talking about having ti body parts cause yours are worn out, I'd believe that. Lol
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
I saw that this week in person even.

I have no use for something with ZERO suspension.
I got no butt.

Cute little bike though. It is a ****(really) darn shame they don't make Real Go karts Anymore!
 
Last edited:

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Ram charger of some sort.....
How about a supercharger?
Get this so I can copy.
with intercooler...

420cc = 210cc per crank revolution
Add say 6 psi boost (40% more air) for about 300cc per crank revolution.

The AMR300 is 300cc per revolution, but the 500cc AMR500 is cheaper online.

http://www.ebay.com/itm/like/322320726262?lpid=82&chn=ps&ul_noapp=true

---------- Post added at 12:53 PM ---------- Previous post was at 12:50 PM ----------

Here it is with no intercooler.
http://www.ebay.com/itm/Toyota-Suba...ash=item33bc0f16cd:g:jzEAAOSwARZXliUb&vxp=mtr
 
Status
Not open for further replies.
Top