I need sprockets and a hub or two

[beansdaddy78]

I am looking for sprockets, and a hub,

i need the hub to be for a 1" axel with a 5 1/4" bolt pattern

the sprockets to be for a 5 1/4 inch bolt pattern

im looking for several different teeth count sprockets so please let me know what you have and what you want for them. and if you would be willing to ship them. im willing to buy 1 or several

shipping to 62902

id be willing to pay $12 per gear $20 per hub since the rules say, but i honestly am open to anything so just let me know if you got some and we can go from there. thank you

 

[kendelrk]

Add a location and how much you would be willing to pay, the rules say so

 

[getting kart smart]

Check out www.mfgsupply.com They are reasonably priced, fast shipping, and $6.99 flat rate shipping on whatever you ordered. It's about the only place I buy from.

 

[souperman000]

I think you will have trouble finding those hubs, unless you look for atv ones.

 

[beansdaddy78]

I think you will have trouble finding those hubs, unless you look for atv ones.

i looked on a atv i have here in the junk yard, and the axel from the middle looks like it tapers from being large in the middle to smaller at the tips. im gonna see if maybe it has the parts i would need on it. thanks for the advice

 

[anderkart]

Beans, heres some bargains on new parts:

http://www.bmikarts.com/item/Unihub---Sprocket-Hub-AZ2556-5765
http://www.seventh-gear.com/store/products.php?cat=55
http://www.bmikarts.com/item/WMS-Tuck--Run-35-Split-Full-Tooth-Sprocket-6535-7902
http://www.bmikarts.com/item/Sprocket-35-60T-AZ2152-725
http://www.out2win.com/catalog/sprkt_axle.html

You might try sending this guy a PM too: http://www.diygokarts.com/vb/showthread.php?t=6248&highlight=gears

ps:
BMI has some low prices, but be sure to compare the shipping costs before you decide who is trully offering the best deals here...

You can also find some smokin deals by searching on ebay.
And here:--> http://karting.4cycle.com/forumdisplay.php?f=54

 

[anderkart]

I think you will have trouble finding those hubs, unless you look for atv ones.

Those hubs are actual fairly common, because several brands of 1970's-era (american-made) racekarts used that size, plus lots of funkarts still use the smaller 1" diamiter axles with racekart style sprockets

Most all ATV hubs would be made to fit metric-sized axles. Hubs made to fit 25mm axles might interchange/clamp onto a 1" axles diamiter fine, but the metric-sized key prolly wouldnt interchange into the OP's 1/4" keyway in his 1" axle very well.

 

[beansdaddy78]

Beans, heres some bargains on new parts:

http://www.bmikarts.com/item/Unihub---Sprocket-Hub-AZ2556-5765
http://www.seventh-gear.com/store/products.php?cat=55
http://www.bmikarts.com/item/WMS-Tuck--Run-35-Split-Full-Tooth-Sprocket-6535-7902
http://www.bmikarts.com/item/Sprocket-35-60T-AZ2152-725
http://www.out2win.com/catalog/sprkt_axle.html

You might try sending this guy a PM too: http://www.diygokarts.com/vb/showthread.php?t=6248&highlight=gears

ps:
BMI has some low prices, but be sure to compare the shipping costs before you decide who is trully offering the best deals here...

You can also find some smokin deals by searching on ebay.
And here:--> http://karting.4cycle.com/forumdisplay.php?f=54

great thats what i needed and the prices are right too anderkart. i appreciate all the work you did, i swear i tried and entered what i thought were the proper key words looking for those parts even on the same sites and didnt find what you did, so thank you .

just wanted you to know that i look too, and dont just ask first. (at least not everytime )