I need some help

M

Marccaporicci

New member
Messages
1
Reaction score
0
Location
Richmond va
I picked up a bird engineering cart, all original from what I was told. Serial number 41531 it has the original Tecumseh 3hp, that runs.

I have a few questions.

1) what size chain does this take, it has one,and the clutch,but the clutch seems bad, I want to pick up another one,but I'm confused on the chain sizing.

2) what is something like this worth, I wanted to put a live axle in it, but I don't want to butcher it if it's worth a pretty penny stock.

---------- Post added at 02:22 PM ---------- Previous post was at 02:21 PM ----------

And I'm not very good with computers how the **** do I post a picture
 
O

ol'joe

Member
Messages
108
Reaction score
6
Location
New Mexico desert
Assuming you have the picture in your computer, click on "go advanced" at the lower right of this screen. Next screen will have two rows of symbols at the top, and the top row, nearly to the right side but not quite there is a paper clip image.

Click on that and the screen will offer you a chance to "browse" through the pictures and documents on your computer. When you find the picture you want to post, click on it, then click OPEN at the bottom of the frame.

Next screen will give you the opportunity to transfer the image to your post, but I forget exactly what it looks like...pretty much self explanatory from that point on. Make sure your cursor is where you want the image in your post.

A chart to identify roller chain size is HERE:

https://www.rollerchain4less.com/roller-chain-dimension-charts

Enjoy.....Joe
 
You must log in or register to reply here.
Top