I don't know jack about engines... Throttle?

Status
Not open for further replies.

EnterTheHatrix

New member
Messages
7
Reaction score
0
Hi guys,

I started building a go kart with my brother from scratch. we've built a frame out of an old bed frame (if it can support 2 people, it can support me) and I'm at the point where I mount the engine.

So, I went on ebay and bought an engine (suntom sg200, apparently a honda 6.5hp clone)

Now, on the side it has a hare and a tortoise, which I'm assuming is the throttle (I haven't oiled or started yet, so I don't know. Still need to mount the engine)

I need to find out how to connect a throttle cable to this, but I can't find anything specific to this engine. Hopefully you guys can help point me in the right direction.

The instructions I got with it were such poor quality, I could barely make anything out on the diagrams or text, so I'm no wiser.

Also, FYI, I intend to use a brake cable for the throttle. Should be OK, right?
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
I assume you mean "bicycle" brake cable? Perfect. Yes, that tortoise and hare lever-thingy is the throttle lever. If you search the forum, you will find plenty of throttle connection ideas. The clone stuff is completely generic, and even the brand-specific info can apply. Just examine how it was done, and apply the information to your build. If you want, I can provide a pic of how I did it on my kohler clone (still governed). Either way, the process is simple and straightforward.
 

EnterTheHatrix

New member
Messages
7
Reaction score
0
Thank you, I'll take a look around then. Diagrams would be great but I'm sure someone else has made one somewhere, so I'll take a look. Thanks

Yes, I did mean bicycle brake cable.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
For this application, I very simply drilled a small hole in the throttle lever and passed the cable through that hole. There is a cable end crimped onto the cable, much like the little metal end on your brake cable. The cable casing is then fastened to a secure place either on the kart (like I did) or on the engine, in line with the lever's travel direction.

It is also worth mentioning that you need to loosen the nut that the throttle lever swivels on so that it moves freely. You also need to add return springs. Look at my pics. There is a small spring to pull the lever back to idle when the cable is released, and a larger spring to pull the pedal back.
 

Attachments

  • throttle.jpg
    throttle.jpg
    86.8 KB · Views: 24
  • gas pedal.jpg
    gas pedal.jpg
    110.5 KB · Views: 22

kadsjr

Member
Messages
51
Reaction score
0
Location
UK,London
ok dude, i have the same engine .. the suntom sg200 and i have sucessfully made mine to work with my kart... the throttle is located under the fuel tank ... it has a spring...

i have loads of videos on my kart with this engine
@ www.youtube.com/kadsjr
 
Status
Not open for further replies.
Top