I D Tecumseh engine blocks

[okenadie]

I do a lot of work on small engines. Some time ago I bought a load of stuff from another shop. In with it all were several bare blocks. I have ID'ed them as Tec's. But which one's I'm not sure. They seem to be 5hp. But there are many different one's/ By the way. They are all horizontal. But none have the extra shaft for PTO or reverse drive.

 

[Doc Sprocket]

I still haven't owned a Tec with the auxiliary PTO. Engines can be identified by numbers stamped into the sheetmetal. Throw up some pics if you like.

 

[okenadie]

There is no sheet metal. These are new, "I believe" blocks" I already knew about the numbers on the sheet metal. Should have been more details in my post I guess. As they are bare blocks. Is there anyway they can be ID'ed I know there are many differences from one to another. I need to find the parts to build them up. Either that or sale them as they are. I can take some pictures of them. If that would help. But there are no numbers stamped in the castings. By the way, this site is great for info.

 

[Doc Sprocket]

Pics would help. Measurements from there.