Hydraulic Brake Parts

[TKart]

Hey guys I have a hydraulic disc brake setup up for grabs. I have everything except a fitting for the master cylinder and the brake rotor. The aluminum caliper, master cylinder and the brake pads are brand new. The steel braided line is used but in usable condition. We use this setup on the full size 400 pound karts and they stop on a dime. The only difference is we use a dual caliper system because the karts have a floating hub on one side. This here should snatch the snot out of your nose and it's very very durable. The master cylinder can also be rebuilt. We switched to willwoods so these are just taking up space.

Located in Southern California
$80 for everything plus shipping.
Paypal only

I also have two brand new carbs for the Honda GX160 5.5 and Honda GX270. Genuine Honda Parts not cheap clones. Never had any fuel thru them

5.5 carb $40
9.0 carb $50

*Also have a bunch of usable random used stuff laying around that usually either gets thrown in scrap piles or thrown away ie spindles, axles, rotors, tie rods, random engine parts, reduction wet clutches, old wheels, used tires etc etc sometimes whole karts that have structural damage but cannot be put back into service.

 

[jamyers]

I'm interested in the brakes, is a rotor included?

Edit: dumb question, I shoulda read ALL the words in the OP.
Let me ask this way; is there an old rotor in the pile that would work, or what rotor (size, mounting, etc) do you use?

 

[TKart]

I'm interested in the brakes, is a rotor included?

Edit: dumb question, I shoulda read ALL the words in the OP.
Let me ask this way; is there an old rotor in the pile that would work, or what rotor (size, mounting, etc) do you use?

As far as mounting goes youre on your own buddy. Youre gonna have to break out the welding tools and fab up mount for the caliper and for the master cylinder. The karts we use have the provisions there already.

I actually pulled a rotor assembly off of an old axle today. The rotor setup is for 1.25" axles. Here's a pic and its included with the rest of the stuff. I also have this on e*ay. So if it sells there then it's gone or if a forum member wants it I'll stop the auction.



*5.5 carb sold

 

[jamyers]

Sorry for the 2-day delay, I blame taps talk for not flagging this thread, lol.

I'll take the brake setup from the OP if its still available. (I've got a line on a rotor and 1" hub locally.)
How would you want payment?

Edit: Ok, found it on eBay.

 

[TKart]

Sorry for the 2-day delay, I blame taps talk for not flagging this thread, lol.

I'll take the brake setup from the OP if its still available. (I've got a line on a rotor and 1" hub locally.)
How would you want payment?

Edit: Ok, found it on eBay.

Pm sent

 

[TKart]

Brake kit sold.

The gx270 9 horse carb is still available.

 

[EBACH]

wouldn't happen to have two 6x8 wheels would ya?

 

[TKart]

Sorry man no 6x8s. I have a crate of used rims and a bunch of used tires but they measure 12'' tall x4 wide and mount to a 5'' diameter two piece wheel.

 

[jamyers]

I must say that the hydraulic brake system arrived today, and it looks AWSOME! The master cylinder and caliper look like something off of a small car - plenty heavy duty!

And TKart threw in the rotor/hub, THANKS!

 

[TKart]

I must say that the hydraulic brake system arrived today, and it looks AWSOME! The master cylinder and caliper look like something off of a small car - plenty heavy duty!

And TKart threw in the rotor/hub, THANKS!

No prob man glad you like it.