How many G's is great?

Status
Not open for further replies.

leflane4pasnonly

New member
Messages
8
Reaction score
0
Installing my numbers into the speed calculator, it shows that my kart will produce .4G's upon takeoff. Maybe I should find the correct gearing by the end result in G's? I just don't know what a good amount of G's would be. gx390 stock, small manco dingo frame stock, single seater, I weigh 180lbs. I really don't need more speed than 35mph? I really just want a strong 20mph kart...ripping wheels on a dirt track around every corner. How many G's to burnout on pavement from a dead stop?
 

jeremybentham

New member
Messages
347
Reaction score
0
Location
Dutch Country
G's don't matter. It's R's you want.

 

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
you using this calculator? G's has nothing to do with determining your karts performance, in fact if i'm correct G's are determined by you karts performance, not the other way around.

anyway, ignore the G's. what you should be interested in is where it says "force from engine pushing kart", and "force required to make tires slip". if the number in the "force from engine pushing kart" is a bit greater than the "force required to make tires slip" box, then theoretically, you will spin the tires.
for this calculation to be correct almost all the information you fill in must be correct! you should also gear it for a little above 20mph, if you wish to go 20mph.


EDIT: toystory beat me!
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
How many G's to burnout on pavement from a dead stop?

Regardless of debate whether "g's" is an appropriate term, in this case we're referring to an acceleration force. Having enough torque to spin the tires has absolutely nothing to do with g-force or acceleration. Acceleration occurs once you start moving, not spinning the tires. Ponder this- my kids' kart only has 4hp, but spins the he// out of 'em on dirt, and will even chirp them on pavement. This is due to a very low gear ratio, and nothing more.
 

leflane4pasnonly

New member
Messages
8
Reaction score
0
wow, thanks for the quick responses guys. G's as in Gravity Force on the guru calculator yes...I thought that was the calculator you sponsered here. Ok, I'll pay attention to the "force to move tire". Thanks again
 

leflane4pasnonly

New member
Messages
8
Reaction score
0
Here's my complete info I know of.

Weight of cart 200lbs
my weight 180lbs
12 Horse Power GX390
3600-3900rpm
Chain pitch? .5 I think? Don't really understand that one
9 tooth drive currently
60 tooth driven currently
18" tires
55% I think weight over rear..it's small.
Comet 40 series front and rear

Looks like if I go with a 75 tooth driven, I'll have a good "force to slip tires" with a 58mph max. Is that even possible? Gearing it for only 20mph, I lose all "force to slip tires". What is a normal setup and normal options with the gx390 comet 40? series?
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
I'll have a good "force to slip tires" with a 58mph max. Is that even possible? Gearing it for only 20mph, I lose all "force to slip tires".

I have no idea whatinhell that's supposed to mean. The reality of it is, geared for 20 (low gearing) is going to have a lot more torque at the tires than the high gearing (58mph). So, you've got me...

Bear with me thru a couple edits- I'm running your numbers thru my tried, true, and proven calc...

With your current setup of 9T & 60T @3900RPM, your theoretical top speed is 31.33MPH.

Changing to a 75T, I show a max of 25.06MPH.

So I dunno what the "guru" is smoking or if you entered something wrong but the numbers you got are nuts.

For comparison- I have a GX340@4100RPM, 17.5" tires, Comet 40/40, and pretty dang heavy (310+me), I'm hitting 45MPH with enough torque to spin a bit in dirt on takeoff and do some donuts in gravel and dirt. I have 10T and 48T. I could stand to gear down some, but I think I'm about to swap engines.
 

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
So I dunno what the "guru" is smoking or if you entered something wrong but the numbers you got are nuts.


:roflol:

back on topic, i just ran some numbers, whats wrong with your current setup? with that 40 series tc you should be spinning the tires easily, and like toystory said, theoretical top speed of 31.33mph.
 
Status
Not open for further replies.
Top