how do i open a briggs fuel filter?

Status
Not open for further replies.

Bluethunder3320

New member
Messages
5,677
Reaction score
39
i have a couple of these and i need to put them on my tecumseh. one of them is 20 years old, one is 35 years old.

all those years ^^ must put some gunk in them. how do i open them so i can clean them out?

thanks.

 

newrider3

New member
Messages
1,674
Reaction score
5
Location
Colorado
You don't, you throw them out and buy a new one.
If you really want to re-use it, you can spray some brake clean in through the outlet side, to blow the junk that has collected on the screen back out the inlet.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
You don't, you throw them out and buy a new one.
If you really want to re-use it, you can spray some brake clean in through the outlet side, to blow the junk that has collected on the screen back out the inlet.

wow that sucks. :ack2:

i suppose they are so cheap ill just get some new ones.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
Ok thanks. Ill check ebay. I bet theirs something clean-able. I have one
For a 2 stroke that comes all apart. Of course it was like 3 bucks. Aluminum.

I tried taking the briggs one apart with channel locks and theres no hope.
 

sexyvicta

New member
Messages
806
Reaction score
2
most car fliters i've seen are the same as that pretty much. just bigger. You can get older ones with a glass bowl that you can dissasemble tho

but yeh just go buy one they cost like $2
 
Status
Not open for further replies.
Top