Ok, so today I got it all put back together, mounted up to some crazy wooden contraption I threw together to hold it, and got the carb and oil fill reoriented. My only problem is that it doesn't have spark. Here's some pictures of how it stands now.
I put a disconnect in the wire TS said to add a kill to so that I could kill it. I couldn't find a proper switch, so this will get it done for now.
Here it is, but disconnected.
No throttle.
WOT!!!!!
Here's the wire that went to the engine brake, which TS said to add a kill to and tie back into the block. It's stripped and then bolted against the housing which bolts directly to the block.
This is how I cut and then soldering iron-ed the oil filler to point vertically. I added some "precision bent" scrap metal to help support the oil filler and keep it in place.
It's all filled up with 20oz of oil and there's gas in the carb. I'm just wondering if I did what I was supposed to do with the engine brake wire.