Honda clone 6.5hp engine high rpm's

[10286899]

im going to order this engine

http://www.affordablegokarts.com/mm...Code=A&Product_Code=JDJF2001&Category_Code=E2

it has alot of upgrades and pushes 6000rpm's.

Just wanna see your opinions on this engine before i buy it.

 

[ironman]

h.f. has the same motor no upgades on it on sale right now for $99 so you got to figure us there 300.00 in upgrades on that motor.

 

[Jerryburger]

It'd really back up their higher price by posting a dyno run. Stock, it's 9.75 ft/lbs of torque and 6.5hp.... I wonder what someone can get out of those with the mods they listed?

 

[10286899]

well the sale nanager guaranteed 6200rpm's , idk about torque but i only ride on the street/parking lot so its enough power for me.

 

[oscaryu1]

6200 only? You can probably hit more with a new jet or so...

 

[ed1380]

id get 4 hf motors for that price and run 2 at a time. and once they break you still got 2 more

 

[eliza]

Reply

sites are source of information and knowledge.this is one of them.i read all the post and like it so much.I book mark it and mail all of my friends to must check it.so thanks on this nice sharing,

 

[devino246]

Or you could just buy a bike engine and probably have some money left over. You'd get more power too.

 

[slideways]

The motor cost $99 and the mods are another $225 or so. So they are getting $150 in labor for the upgrades. Not too terrible if you don't know anything about motors.

The reason it will turn over 6k is the 18lb springs. The stock ones limit to 5500 or so. The safety comes in the flywheel and rod so they don't break. You will have no reason to turn over 6000 rpm with this motor though. It has the stock cam and it is meant to make power at 3600rpm. Without changing the cam you are just making noise.