hi new guy here, !!!

[smokey636]

hi just got a coyote go kart and im pumped, i already have a YZ 125cc engine to slap on, but im very concerned about the brakes only have 1 rear caliper, where can i find a hub that will fit my cart? ive been at the coyote site but cant see them there, i need hubs rotors and calipers, can som1 plz guide me or sell me a setup something im pretty excited to build this thing!! i bought it with a 125 4 stroke but wanna go the 2 stroke route and give it a try, plz help me out, i got speed but no brakes hahaa!! thanks

 

[Chrispy91]

For just basic break stuffs i would go to this link. it just has some different calipers and discs you could use
http://www.bmikarts.com/Brakes-Accessories_c_198.html

 

[landuse]

For just basic break stuffs i would go to this link. it just has some different calipers and discs you could use
http://www.bmikarts.com/Brakes-Accessories_c_198.html

Those might not be compatible with his specific racekart without some fab work

Smokey - I would PM Anderkart. He is out residant race guru, and he would be able to point you in the right direction

 

[smokey636]

thanks guys

 

[anderkart]

ive been at the coyote site but cant see them there, i need hubs rotors and calipers, can som1 plz guide me or sell me a setup something

You'd need to call/email Coyote for those parts, here's a link to they're contact info: http://www.coyotekarts.com/index.php/contact/coyote

You'll also need front spindles with caliper mounts, a second master cylinder/front brake lines and the brake bias bar components.

Here's a pic showing how the dual master cylinders mount (side by side) simply using 2 longer bolts, plus a bias bar setup on a shifterkart. This isn't a coyote brand kart, but your setup would be very similar:

 

[smokey636]

You'd need to call/email Coyote for those parts, here's a link to they're contact info: http://www.coyotekarts.com/index.php/contact/coyote

You'll also need front spindles with caliper mounts, a second master cylinder/front brake lines and the brake bias bar components.

Here's a pic showing how the dual master cylinders mount (side by side) simply using 2 longer bolts, plus a bias bar setup on a shifterkart. This isn't a coyote brand kart, but your setup would be very similar:

hey buddy thanks a lot!! i will contact them asap!!

 

[smokey636]

they said $800 - $900 jeeeeeezzuuuuussss!!! hahaha waaoo