Here and Now

Status
Not open for further replies.

Phoenix

New member
Messages
6
Reaction score
0
Location
Port Washington
" I'm young and always tinkering and when I dropped off our old stove and water heater at the scrap yard found a kart.

It's a three wheeled, 205cc with a Briggs on it.
Was running already started making modifications
such as new brake lines, figured out a throttle solution
Running a counter spring on the choke and whatnot

So I'm gathering info and joining the club to make this into
A decent 4 wheeled kart."

Well as it turns out I should've kept that water heater to make my air compressor tank bigger. But a year later and I finally got to building my kart. (Lots of little things like 240v outlets needed to be buried, get a welder ect.. Rebuilding compressor..)
Anyways here I am now. I still plan on putting a skid plate and bumper on and snow chains, for WI!
 

Attachments

  • image.jpg
    image.jpg
    98 KB · Views: 11

Phoenix

New member
Messages
6
Reaction score
0
Location
Port Washington



Like I mentioned before, next steps are snow chains, paint job, skid plate.. After that I'm not sure. Lights? Mounts for tubing ropes? Maybe...
 

Attachments

  • image.jpg
    image.jpg
    117.3 KB · Views: 58
Status
Not open for further replies.
Top