help!!!!

[webstertroy90]

Ok I just got a carter cart with a 11hp clone on it... it has electric start and pull start.. the electric start wont work with the key... but you can bridge it and it will start... what do I do... Also... I cant fig out how to go the throttle cable... any help would be great...

 

[ryf]

bridge what? the back of the key switch or the starter solenoid. if you bridge the key and it starts its the key switch, if you bridge the solenoid and it starts try putting voltage just to the switch side of the solenoid. if it starts then the solenoid is good, and either a bad wire or bad switch. hope that helps.

 

[webstertroy90]

he bridges the sloenoid

 

[ryf]

see above, bad wire, bad switch or bad solenoid, use a voltmeter and see where its not working.