Help on identifying a part

Status
Not open for further replies.

bpressnell

New member
Messages
3
Reaction score
0
I recently was given a used go kart and need to replace the clutch and rear wheel sprocket. There is also another part that was just below the clutch that appears to be a part that keeps the slack out of the chain. It had a rubber sleeve that went around the metal disk / cylinder and that is really all that needs to be replaced as when the chain came off it tore it up. Please see the attached pictures and if possible give me some idea as to where I can replace this part. The cylinder / disk part itself has the numbers 2001020 and 5203-2R5 on it and the word CAP.
 

Attachments

  • IMAG0146.jpg
    IMAG0146.jpg
    44.7 KB · Views: 3
  • IMAG0145.jpg
    IMAG0145.jpg
    41.9 KB · Views: 2
  • IMAG0143.jpg
    IMAG0143.jpg
    51.4 KB · Views: 2
  • IMAG0142.jpg
    IMAG0142.jpg
    33.8 KB · Views: 2

anderkart

Moderator
Messages
6,432
Reaction score
392
Location
Surprise Arizona USA
Yeah It looks like the roller for a chain tensioner. I think those #'s are just for the bearing.

Do you know what brand/model kart it is? Post some kart pics if your unsure.

If that part is just rubber you could find a radiator hose that very-tightly fits over the bearing. Then simply cut off short sections and have a lifetime supply of replacements... You could probably just clean everything up real good and super glue them on.
 

bpressnell

New member
Messages
3
Reaction score
0
Here is a picture of the go kart after doing some fixing up. I have no idea what brand / model it is.

any idea where I can purchase replacement parts for the chain tensioner?
 

Attachments

  • IMAG0554.jpg
    IMAG0554.jpg
    77.4 KB · Views: 4

bpressnell

New member
Messages
3
Reaction score
0
Good Idea on the Radiator Hose. If I can't find the correct part I'll definitely think about trying that.
 
Status
Not open for further replies.
Top