Help Me Decide on a clutch!!

Status
Not open for further replies.

weekendwelder

New Member
Messages
19
Reaction score
0
Hey Guys I'm kind of stuck. I have a manco intruder that I bought as a frame and I am rebuilding it. Right now I have a 6.5hp honda clone on it. When i test drove it, it burned up a max-torque clutch in less than 5 minutes. So then I wanted put a torque converter on but all I could find is cheap tc2 chinese clones. But, I was wondering should I try to track down all the comet parts, or buy a new Lamar 125cc engine for less than $300 and then I would have a built in manual transmission. Or should I go with a heavy duty clutch such as a Hilliard. If I did go with the Lamar, how difficult is it going to be set up all the linkages. I am mechanically inclined and I can weld. I just want to know what you guys think is the best choice. Thanks in advance!

My Go Kart Pictures: (The gokart looks better now than it does in the pictures cuz i got the front end all straightened out and new tires) http://brandonsgarage.weebly.com/pictures.html
 

KieranM

Doin It!!
Messages
1,409
Reaction score
3
Location
Kilkenny, Ireland
you must have been really driving the hell out of it, clutches dont wear out that quickly so you must have a gear ratio problem or the like, did you oil the clutch?
 

weekendwelder

New Member
Messages
19
Reaction score
0
No I did not oil it. But it never worked right from the start. I'd give it the gas, and the clutch just smoked like crazy, but the kart wouldn't move. Then I took the kart to a paved road to try and the clutch locked up and the kart took off right as i pull started. So then I took the clutch off and looked at it and it is all burned up.
 

weekendwelder

New Member
Messages
19
Reaction score
0
Would adding a jackshaft help reduce the strain on the clutch? I currently have a 11 tooth clutch and a 66tooth sprocket I believe.
 

weekendwelder

New Member
Messages
19
Reaction score
0
I think I am gonna go with the Lifan 125cc pitbike engine with the manual transmission and clutch.
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
Make sure driven sprocket has a large enough diameter or pit bike clutch will burn up as well.
Check out dirtbike sprockets and notice how much larger they are than their streetbike counter parts.
 

hghelena

New member
Messages
1
Reaction score
0
clutch for 6.5 honda clone

A Hilliard clutch will burn as well.
Can be equated to trying to pedal a 10 speed bicycle in 10th gear from a standing stop.
Imagine the strain on the drive-line with 6.5 hp.

Can you suggest a clutch for a 6.5 honda clone. Im rebuilding a go cart & read your suggestions for throttle linkage on that same engine.
Thanks HG
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
Please do not bump old threads unless you have useful relevant info to add.
Start your own thread with your problem.

To answer the question, if you have a comet tav or 30 series setup you can get a plastic cover for them.
 

wangoto

New member
Messages
3
Reaction score
0
the reason am asking is the cover i have on it now does not have a bottom . so if the kid get,s into water the belt will get wet . am sorry for not knowing how this works
 
Status
Not open for further replies.
Top