help identifying this clutch

Status
Not open for further replies.

beansdaddy78

JR. Member
Messages
565
Reaction score
2
Location
Carbondale IL.
I picked this clutch up in a box of parts. Had a couple questions

Is it complete? Does it look like it might be usuable and which model is it?
 

Attachments

  • IMAG0622.jpg
    IMAG0622.jpg
    57.3 KB · Views: 44

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
I know the driver is not a 30 series, and that it is 3/4" bore, but I cannot tell if it is a max-torque, or possibly a Comet 20. The driven appears to be a Comet 40/44. More pictures would help with identification.

The system looks complete, minus belt, hardware, bushing, hub, and spacer. Unfortunately, if my identification is correct the driver and driven wont work together without modifications. Chances are good that you could get both the driver and driven in working condition with a bit of elbow grease and a few minor replacement parts.
 

Blazkowiez

Kart Aficionado
Messages
2,538
Reaction score
48
Location
Houston, Texas
Please take more pictures of both the driver clutch (smaller one that goes on the motor) and the driven clutch (the one that goes on the jackshaft)

Cummins is wrong, none of that is series 30.
 

beansdaddy78

JR. Member
Messages
565
Reaction score
2
Location
Carbondale IL.
im not sure which one goes on the motor, when i got the pieces they were in a box and i bought it along with the jia ling 5.5 clone for $5 , the clone i kinda tore down and cleaned and got it back together , just painted the cover plates and gonna install those tomorrow i hope.

the motor has a piece of the clutch stuck on the shaft, i was never able to get it off so i just left the motor shut and hope to put that clutch together to test the motor out on something.

the clutch does say comet on it, was hoping someone could tell me what series or model it was. and possibly if it is complete and would it work
 

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
was hoping someone could tell me what series or model it was. and possibly if it is complete and would it work

Please take more pictures of both the driver clutch (smaller one that goes on the motor) and the driven clutch (the one that goes on the jackshaft)

I know the driver is not a 30 series, and that it is 3/4" bore, but I cannot tell if it is a max-torque, or possibly a Comet 20. The driven appears to be a Comet 40/44. More pictures would help with identification.

The system looks complete, minus belt, hardware, bushing, hub, and spacer. Unfortunately, if my identification is correct the driver and driven wont work together without modifications. Chances are good that you could get both the driver and driven in working condition with a bit of elbow grease and a few minor replacement parts.

.....


The driver is the clutch on the left of the picture, which as Blaz said is the smaller of the two. I remember seeing a picture of your engine and I believe it had the driver's hub stuck on the crank. That hub will need to come off if you want to put the CVT back on.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
In the picture, the three components on the left are the driver. On the right in the foreground is the driven. Background right is a soap dispenser...
 

beansdaddy78

JR. Member
Messages
565
Reaction score
2
Location
Carbondale IL.
.....


The driver is the clutch on the left of the picture, which as Blaz said is the smaller of the two. I remember seeing a picture of your engine and I believe it had the driver's hub stuck on the crank. That hub will need to come off if you want to put the CVT back on.
you are correct you did see the piece on the motor. im having problems getting pics to post so unfortunately the one i got is the only pic i can get up and havnt been able to get a pic of anything else up since. i was never able to get the piece off the motor so i never got to open the motor and inspect it, im hoping its good :D i still havnt got the rest of the motor back together yet but hope to sometime today. im probably going to try to sell the clutch stuff if its even worth buying to anybody. i hope to get some loot to move another project along. let me know if you know anybody who absolutely needs whatever it is i have, i can send more pics via email or cell phone so if anybody would like to see closeups and is willing to give an email i would be glad to send pics there and promise not to bother for any other reasons :p i know how annoying i can be
 
Status
Not open for further replies.
Top