help identify motor please and other Q's

Status
Not open for further replies.

spools

New member
Messages
16
Reaction score
0
So today I found a donor motor on craigslist for $150,so I decided to gamble since its brand new in box zero miles,now the guy has no idea what make it is or if its 2 or 4 stroke so I found this number stamped on the side...

156fm1 "or 156fmI cause its hard to read" theres another numbver below says "04102863.

i did search today and it does seem to be a honda cg 125cc which is air cooled 4 stroke electric start but can anyone please conferm this,Also this is going into a tonykart project so any idea on where to find motor mounts/shift linkage/and other accesorys to place this in the kart,Any help would be great I'm hoping maybe the cr125 mounts may line up but i hope i dont have to fab some up,its also in need of a few accesories since its a crate motor thanks for any help on this.
 

spools

New member
Messages
16
Reaction score
0










heres a few pics with my webcam,please let me know what motor this is and details along with where to source parts so i can swap this into my tonykart thank you all.


here's what its going in =]

 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
I doubt the mounts would be interchangeable- one is a motorcross 2 cycle, the other is a commuter 4 cycle. I would contact the manufacturers of the mounts.
Btw, that is one nice deal!
 

spools

New member
Messages
16
Reaction score
0
hmm if it turns out to be a headache to source parts and swap it in what would be a good price to sell it on craigslist for?I may do that in place of a cr 125 or cr 80 2 stroke anyways since theres so many websites that make conversion parts for swaping them into karts.
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
hmm if it turns out to be a headache to source parts and swap it in what would be a good price to sell it on craigslist for?I may do that in place of a cr 125 or cr 80 2 stroke anyways since theres so many websites that make conversion parts for swaping them into karts.

You could always fab your own mounts or get a machine shop to make some. I have no idea what that is worth, but I know it was worth more than what you paid for it.
 

spools

New member
Messages
16
Reaction score
0
will the oem cg 125 clutch cable be long enough or should i try somthing like an extended one for karts and what about shift linkage there kinda universal right?I'm planning on building just like a shifter kart.So the more feedback the better thanks.
 

spools

New member
Messages
16
Reaction score
0
so this motor will probably max out around 70-75 mph and take forever to get there,what would you guys reccomend for sprocket size and will a regular shifterkart chain work or can i make the cg 125 chain small enough by removing links?I know sharkshifter.com has chains for 2 stroke shifters but not sure if it will fit the cg can anyone link me a good sprocket and chain combo that will work for this cg 125 that would be great.


Another question will I have to mount the gas tank above the motor to be gravity fed or will it be fine below it the way it originally came?Sorry for the question overload you guys are my only source of info on the swap and I thank you for all your help your awesome.

Other then that I found a 50inch clutch cable from sharkshifter.com that I'll use along with a clutch lever from them that bolts onto the steering shaft for shifter karts,I'm also debating on when I mount the motor if I should have a jack screw to be able to slide the motor back and forth by the screw kinda like some alternators do to tighten the belt but I think it would be easier to just mount it solid and use a roller type tenshioner for adjusting the chain tenshion.also the seat gets in the way of the motor which has a oversized case for its size maybe i could get around this by simply removing the casing but not sure if oil flows through the left side case i know thats a dumb question but I dont know and I assume it doesnt since the magneto is right there?Please help guide me on this build when you guys get the chance this is my first shifter kart I greatly appreatiate your help thanks a bunch.
 
Status
Not open for further replies.
Top