Help ID Engine - Noob first build

Status
Not open for further replies.

Tre

New member
Messages
3
Reaction score
0

Attachments

  • s0y2RcL.jpg
    s0y2RcL.jpg
    642.8 KB · Views: 8
  • UWo1X4W.jpg
    UWo1X4W.jpg
    648.7 KB · Views: 8
  • tDP2Jbu.jpg
    tDP2Jbu.jpg
    650.3 KB · Views: 12
  • lSQ6BxS.jpg
    lSQ6BxS.jpg
    553 KB · Views: 11

Tre

New member
Messages
3
Reaction score
0
Awesome, that's very helpful.
Any idea on the year range? Is there a good place to buy used parts or should I just look around on ebay and such? Thanks
 

landuse

Moderator
Staff member
Messages
18,804
Reaction score
613
Location
Pietermaritzburg, South Africa
Awesome, that's very helpful.
Any idea on the year range? Is there a good place to buy used parts or should I just look around on ebay and such? Thanks

Without the numbers on the engine, it would be difficult to give you a year. Ebay will have loads of parts though. Flatheads are VERY common
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
Yet again....This is another one of those many times a location would be helpful.....Assuming your not on Gilligans Island and are maybe in the US..... unless you have all the parts and just aren't showing them....ditch it.

The costs of parts that are missing will kill you....

Buy a Harbor Freight Predator 212cc....
 

OzFab

Well-known member
Messages
15,615
Reaction score
76
Location
Warwick Qld, Australia
Definitely a 5hp B&S flatty; based on the carb, I'd say mid '70's...

Missing parts include (but not limited to) head, exhaust & starter shroud; providing the engine runs with those parts added, you could probably find them used for around $50 (give or take)... depending on location...
 

Tre

New member
Messages
3
Reaction score
0
Thanks a ton for the help guys.
I'm in Phoenix, AZ.

I just found the head and the starter shroud. No exhaust though. Will post updates as I can
 

Zombient

Junkyard Derelict
Messages
565
Reaction score
7
Location
Waco, Texas
Status
Not open for further replies.
Top