HELP!!! GX-160 Clone Won't Start At All.

Status
Not open for further replies.

spudkilla224

New member
Messages
115
Reaction score
0
I have a 5.5hp GX-160 honda clone and it won't start anytime i tried pulling it over, It seems to flood alot when I pull the engine over.

I've tried blasting a lil bit of carb/choke cleaner in the inlet of the air filter box and work the choke and gas levers back and forth to work the cleaner in.

I've tried Starting fluild in the carb/air box, straight into the engine block.

It has a spark when I pull over the engine.

Could It be that I need to completly tear apart the carburator and clean it with carb cleaner?

Any help would be greatly appreciated. :cheers2:
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
unscrew the sediment bowl on the carb and see if its full of crap. of course, be sure to turn the fuel into off position.

even though it has spark when you look at the plug, remember the atmosphere is like 10 times more pressure in there so it could have weak spark and that means you need to regap the coil to .020 (credit card thickness)

what does the spark plug look like? post a pic of it. (the tip)
 

spudkilla224

New member
Messages
115
Reaction score
0
Thanks every one, I got the GX-160 runnin' today, I put in a new spark plug, and it fired up on the first pull.
 
Status
Not open for further replies.
Top