ONE-EYE
Active member
Ok guys I'm stumped. Took the kart on a few test rides (an hour or 2 each time) and somehow I've DEMOLISHED 2 belts. First off, I know I need to use comet belts only but I want everything to check out before I try to get one on. GPS says my setup is near perfect and seems aligned. The TAV is getting extremely hot and the belts are wanting to flip inside out and tear apart after awhile. I've been driving fast and hard but pretty sure they're not supposed to break that fast. They're the correct belts, I'm putting them on correctly (beveled out and flat nearest engine), and I'm still getting jacked. Are my rpms just too high? Is my driven opening too much? Do I need a different TAV? Is there a better suggested setup that'll suit my hard driving?
Attachments
-
IMG_20211114_162505191.jpg1.6 MB · Views: 6
-
IMG_20211122_170105167.jpg2.2 MB · Views: 7
-
IMG_20211115_140806070.jpg1.9 MB · Views: 7
-
IMG_20211115_141154099.jpg2.1 MB · Views: 7
-
IMG_20211122_170243727.jpg1.7 MB · Views: 7
-
IMG_20211115_140853434.jpg2.2 MB · Views: 7
-
IMG_20211122_170115873.jpg2.5 MB · Views: 7
-
IMG_20211122_170544281.jpg2 MB · Views: 6
-
IMG_20211115_140917044.jpg4 MB · Views: 6
-
IMG_20211115_141023391.jpg3.9 MB · Views: 6