Big Block Engines 301, 420

[Hellion]

Perhaps a genuine ARC rod is paramount, good insurance, but I’d feel comfortable using one of Edwin’s Scamazon $30.00 10K rpm flywheels for the 301.

 

[Kartorbust]

Proceeds to send ignition magnet into low Earth orbit at the speed of mach funk.

 

[Whitetrashrocker]

Proceeds to send ignition magnet into low Earth orbit at the speed of mach funk.

Proof?

 

[Kartorbust]

I wouldn't trust some Chinesium knock off, unless I had no choice. I'll take a namebrand with known quality control and quality assurance when it comes to billet components, especially when it comes to a flywheel magnet.

 

[Edwin Spangler]

Perhaps a genuine ARC rod is paramount, good insurance, but I’d feel comfortable using one of Edwin’s Scamazon $30.00 10K rpm flywheels for the 301.

I wouldnt... Thats why I have a 1/4" shield protecting my pieces. I worry too much about the area, the "base" of the fins. Wouldnt take much porosity (because who knows what composition of metals) to have one let go.

Honestly, with the abuse Ive put that rod thru, Id trust the rod more. Just have to watch those bolts I guess.

When its all said and done, I dont trust either really. Id go ARC.

 

[Whitetrashrocker]

Can anyone find an example of a cast aluminum flywheel failure due to non user error?

I cant.

 

[Hellion]

I wouldnt... Thats why I have a 1/4" shield protecting my pieces. I worry too much about the area, the "base" of the fins. Wouldnt take much porosity (because who knows what composition of metals) to have one let go.

Honestly, with the abuse Ive put that rod thru, Id trust the rod more. Just have to watch those bolts I guess.

When its all said and done, I dont trust either really. Id go ARC.

I saw the photos and I saw mine that I posted for the 212cc Derp, Ducar, Tillotson. The magnet is deeply embedded in the structure, not glued on as an afterthought per the factory cast iron Derp ‘wheels.

Let’s go over here https://www.diygokarts.com/community/threads/predator-212-gov-delete-support-mods.54704/page-2 and continue, or a better thread of your choosing.



Looks spiffy: https://www.diygokarts.com/community/threads/25-99-10k-rpm-clone-flywheel.52424/
I’m cheap and DIYGK is pretty cheap, not buying ready-made go karts and stuff. It implies cost saving...

 

[panchothedog]

Thanks. Looks like a new engine mount is part of the package.

Get the thick heavy duty one. ( They might not come any other way ). The 301 is almost as heavy as the 420. More than double the small block.

 

[ezcome-ezgo]

The aluminum also has less mass, so that would further discourage disintegration.