Gy6 won't spark

Status
Not open for further replies.

Bubbasheff

New member
Messages
2
Reaction score
0
I have ​a fox carbide 150cc that won't fire. Stator and fly wheel, CDI, and coil have all been replaced. The fusible link is also good. I'm thinking bad kill switch (has two) or wire. And suggestions would be great!
 

Bubbasheff

New member
Messages
2
Reaction score
0
I have ​a fox carbide 150cc that won't fire. Stator and fly wheel, CDI, and coil have all been replaced. The fusible link is also good. I'm thinking bad kill switch (has two) or wire. And suggestions would be great!

Ingot out my multimeter, I have 38v at the col wires. And the coil is showing resistance .8 ohms. Do the coil ground through the bolt hole?
 
Status
Not open for further replies.
Top