Gx390 help

Status
Not open for further replies.

Paden87

New member
Messages
122
Reaction score
0
Location
Navarre, florida
I have a gx390 and I have a header on it and decided to make a muffler by packing fiberglass mat into a tube with a hole for the exit. I have taken out the fiber glass because I packed too much and the engine would not stay running. But now I have idle issues as in it idles when on half choke but when I turn off the choke it dies. Could the overly restrictive exhaust I had burned a valve?
 

anderkart

Moderator
Messages
6,432
Reaction score
392
Location
Surprise Arizona USA
I agree with Russ.

If anyones ever removed the Carburetor, Its possible they accidentally re-installed the Insulator plate up-side down. They're made slightly off center and can only make a good seal (between the carb & head) when installed in the correct orientation.
 
Status
Not open for further replies.
Top