GX200 clone problems

Status
Not open for further replies.

redgokart

New member
Messages
18
Reaction score
0
Location
Ulman, Mo
My honda gx200 clone is takes forever to start, and it will only run at full throttle on half choke. it cuts out and splutters at full throttle with no choke. any help would be appreaciated. thanks:thumbsup:
 

redgokart

New member
Messages
18
Reaction score
0
Location
Ulman, Mo
its a brand new motor, i wouldn't think it would already need cleaned. when i had a pulse fuel pump on it it leaked gas from somwhere and still ran the same. the float also has no adjustment that i can tell. where else do i richen it up?
 

Jblankster

*********
Messages
458
Reaction score
0
Location
Illinois
by cleaning it.


take it apart blast all the holes with carb cleaner and see if that helps. brand new=metal flakes from machining prolly still inside there somewhere
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
While you've got engine parts scattered all over the bench, now would be a great time to run out and buy an automotive style inline fuel filter. It may or may not have been a contributing factor, but is excellent prevention.
 
Status
Not open for further replies.
Top