gx200 clone engine budget build

Status
Not open for further replies.

karl

Well-known member
Messages
2,449
Reaction score
719
Location
North east Ohio
Now, I ask you- if 1/4" plate will contain a 20-30LB steel flywheel and clutch parts detonating at 10K, why would it not be MORE than enough to hold back 4lbs of cast (or even machined) aluminum at those speeds or less? Anybody?

Ya! Im right for once!
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
lol i think this is my parts list.

CL1 cam
18lb springs
flat top piston
22mm Round Slide Mikuni, Gas with manifold/adapter, Air Filter, Gaskets, bolts, jet kit, and cable. Low buck way of adding HP, Choice of long or short adapters (short) $119
arc rod

shouldnt get extreme RPM with a torque converter.. just want to be able to hit 5,500 or so in overdrive.
 

slideways

New member
Messages
575
Reaction score
6
Gotta go bigger than a CL1 with that carb... that's overkill. The CL1 is merely a "corrected" stock cam that is maxed out for tech.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
im now thinking of using this off the AGK site.

Cam, Custom Ground .265" Lift, Modified
Code: AGKCAM265M
Price: $50.00
Quantity in Basket: none
This is a .265" lift Dyno cam. This cam is designed for use with larger than stock carburetors. Duration is 236 on the intake and 236 on the exhaust. No block clearance needed for this cam. Drop in and go! 18lb valve springs recommeded.

EDIT: its too bad i cant put a link for it because the way so many of these clone parts websites are set up they dont let you click on individual items...
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
The Dremel (a mini electric die grinder by definition) is a lovely tool for the job. Use the right bits, work slowly, keep things cool, and you're golden.
 

slideways

New member
Messages
575
Reaction score
6
Yea do your research on 4cycle about how to do it correctly.. don't go nuts. Less is more with this kind of stuff.
 
Status
Not open for further replies.
Top