GX140 to 160 or 200 conversion

Status
Not open for further replies.

Minigx

New member
Messages
3
Reaction score
0
I just got a deal on a minibike with a GX140 Honda Engine, my question is can I modify the 140 with GX160 or GX200 parts?
 

Mercado

Member
Messages
44
Reaction score
2
I think you can get a predator non hemi crank and rod y stroke it to 68x55

---------- Post added at 08:37 PM ---------- Previous post was at 08:37 PM ----------

And use ah flat top piston
 

Kartorbust

Inmate #627
Messages
4,605
Reaction score
1,101
Location
Utica, NE
You'll be light years ahead just doing an engine swap. I'm having a hard time trying to find mods for that engine for you. There's a much greater selection for the GX160 and GX200. So at that point a Predator 212 will be overall cheaper brand new and modified, unless you can find a used 160 or 200 for pretty much next to nothing.
 

Minigx

New member
Messages
3
Reaction score
0
Ok, kinda what I expected.
oh well, predator 212 is on the list.
Thank you for your responses gentlemen.
 

65ShelbyClone

Active member
Messages
717
Reaction score
249
Location
SoCal
The 140 and 160 stroke is the same, but the 140 has a smaller flywheel taper. The 140 crank is also cast instead of forged. As best I as I can tell, a forged 160 crank will fit in a 140. A GX200 or larger crank will not drop-in.
 

Minigx

New member
Messages
3
Reaction score
0
65Shelby thanks for that info,
I’m gonna have to keep on the lookout for a 160 then...Since I first posted my question my Son purchased a Predator 212 hemi for the minibike project but, I still wanna “tinker” with the GX140 just for giggles too see what It can do.
Again THANKS for the info !
 
Status
Not open for further replies.
Top