grinch,s project kart

[Lynx_Genisys]

thats awesome!

if i have my way, i'll be picking up an 89 yami rolling chassi to do the same thing with..

I like how it looked, although not crazy about the big tall roll bar part.. hehe, but then again, bighead likes it.. haha.. everyone has thier own preferances...

one hting i noted, was the track width differance between the front and rear..

did you flip the fronts? if not, or either way, try flipping the rear wheels and see if it gets wider or narrower.. (i flipped the rims on my warrior, gained about 4" of width.)

only thing is, if you flip the fronts, check the valve stem, otherwise when you away, you may very likely rip it off on the caliper.. hehe.. seen it happen.. lol

theres ways to deal with that tho, cheap, 6$ lol

anyways, i like how this is turning out, cant wait to see more

 

[saebajacaptain]

sweet

glad to hear it, keep up the good work and the updates!

 

[AnderBlast]

cheers lads ya the front is 4" wider than the back and fliping the back wheels makes no difference im going to have to get some spacers for the rear wheels maby 2 1/2 or 3" ones got my engine aswel will put up pics later

 

[AnderBlast]

heres a few pics of the engine

 

[Lynx_Genisys]

heres a few pics of the engine

Now start it!!

lol.. jk..

 

[redsox985]

I get the feeling you didn't build diapers into the budget for this kart?

 

[AnderBlast]

I get the feeling you didn't build diapers into the budget for this kart?

maby its just me but what is diapers

 

[KieranM]

Thats coming along nicely, did you get any of the wiring with it? CDI, voltage reg...

Is that a hydrolic brake setup on the back, hard to see..

 

[Cam]

Whats the car in the 3rd pic? looks like its got an r32 gts bonnet?

 

[AnderBlast]

kieranm ya i got the whole bike so go everyting except the clutch and trottle cable

cam its a 1990 honda civic and thats the standard bonnet its a work in progress lol

 

[KieranM]

cam its a 1990 honda civic and thats the standard bonnet its a work in progress lol

I recognised the bonnet, didnt say anything though, had a feeling it was a civic...

Alright, just though you didnt have any of the wiring with it, good frame design

 

[redsox985]

maby its just me but what is diapers

What you put on babies/elderly people/people like with crazy karts to prevent them from soiling their pants.

 

[AnderBlast]

What you put on babies/elderly people/people like with crazy karts to prevent them from soiling their pants.

aw rite didnt no what that was id call them nappies i will have to get some large ones lol

 

[brslk]

Your welds have definitely improved but could be better.
Sorry for being so critical.
Good luck with the build. Looks pretty cool so far.

 

[AnderBlast]

cheers man

 

[AnderBlast]

brought the buggy out today to take a few pics outside it gives ya a general idea what it will look and sit like

 

[r97]

this thing looks awesome!

 

[AnderBlast]

tanks man
should have some more pics tomoro when im in me awl lads this computure is too slow
made a good bit of progress in the last few days got the rear swing arm mounted and the rear shocks tacked in place hopefully i can push it out of the shed tomoro to get good pics

 

[CriticalMass]

Swap the front tires, they are on the wrong sides

 

[AnderBlast]

the front tires are just sitting against a cement block for the pic there not attached to the buggy