Governer removal

Status
Not open for further replies.

landuse

Moderator
Staff member
Messages
18,803
Reaction score
611
Location
Pietermaritzburg, South Africa
Could someone please explain to me how you would remove the governer on a Honda GX110 engine
 

Attachments

  • 23112010017.jpg
    23112010017.jpg
    94.1 KB · Views: 10
  • 23112010015.jpg
    23112010015.jpg
    98.9 KB · Views: 10

summitman

New member
Messages
34
Reaction score
0
Theres a youtube video called 'How to remove the governor on a go kart engine clone 6.5 hp' that might help i know its a GX160 not a GX110 but worth a look.
 

sideways

Unfinished projects king.
Messages
1,501
Reaction score
2
Location
Perth, Western Australia
Have a look here. It's basically the same for your engine, You may have some trouble removing that clutch/ gear reduction unit. Perhaps Blaz will give you some advice on that.

Thanks

Hayden
 

Blazkowiez

Kart Aficionado
Messages
2,538
Reaction score
48
Location
Houston, Texas
My main advice is don't remove the governor, you have a very nice track useable Honda with a 2:1 wet bath clutch, just get different sprockets. If it was used on a track which it looks like it was they've got it geared way down for insurance purposes which makes you feel the kart is weak and slow.

If you already know you can alter the gearing and really don't mind if the engine blows up you're might look into bypassing the governor with a different throttle assembly which is what most beginner racers do if they don't know how to or do not want to fully remove that governor.

Here is a link of a group of people that race using these type of engines, they use the 9hp model but same theory.

http://www.naskarts.com/
 

landuse

Moderator
Staff member
Messages
18,803
Reaction score
611
Location
Pietermaritzburg, South Africa
Thanks Blaz. I am a real newbie to karting, and am not too sure about sprocket ratios. What do you suggest i change mine to. I havent counted the teeth on the sprockets, so i am not sure what they are now. I also don't know much about that reduction box. How do you know its a 2:1 wet bath? What does that mean? Is there somewhere i could read up on it?

Thanks

Paul
 

Blazkowiez

Kart Aficionado
Messages
2,538
Reaction score
48
Location
Houston, Texas
Its just the shape of the box that denotes what the type of gear reduction box it is. This is a fantastic set-up that allows you to not need another clutch. I can't suggest any gearing for you without know what speed you would like to achieve, what speed you feel you're going right now, and the tooth count/pitch of your sprockets you're running right now.
 

landuse

Moderator
Staff member
Messages
18,803
Reaction score
611
Location
Pietermaritzburg, South Africa
I have counted the teeth on the sprockets, and the one on the reduction box has 15 teeth, and the one on the axle has 54. My back tyres are 13 x 5.00 - 6".
I haven't really been able to test the kart at speed yet, cos i have to first fix the tyres and rims. I also have a few punctures to repair. The guy i bought it from said it goes real fast, but i don't know what speed that is. I would like it to go at least 20-25mph. It is for my daughter as well, so i don't want it to go too fast yet.

Thanks
 

sideways

Unfinished projects king.
Messages
1,501
Reaction score
2
Location
Perth, Western Australia
I have counted the teeth on the sprockets, and the one on the reduction box has 15 teeth, and the one on the axle has 54. My back tyres are 13 x 5.00 - 6".
I haven't really been able to test the kart at speed yet, cos i have to first fix the tyres and rims. I also have a few punctures to repair. The guy i bought it from said it goes real fast, but i don't know what speed that is. I would like it to go at least 20-25mph. It is for my daughter as well, so i don't want it to go too fast yet.

Thanks

According to the speed calculator your go kart has a theoretical top speed of 19MPH. :thumbsup:

Thanks

Hayden
 
Status
Not open for further replies.
Top