Good Drive Sprocket Needed

Status
Not open for further replies.
S

Shilohboy61

New member
Messages
1
Reaction score
0
Location
Tennessee
Hi Everyone. I bought a Northertool {Part Number 13807} live axle sprocket holder hub. But they don't sell a drive sprocket that fits it. The hub is a 1"axle bore and 1/4 " keyway . Hub length is 1 5/8" and it is four bolt circle. Any idea where I could get a sprocket thanks
 
anderkart

anderkart

Moderator
Messages
6,428
Reaction score
382
Location
Surprise Arizona USA
Shilohboy61 said:
Hi Everyone. I bought a Northertool {Part Number 13807} live axle sprocket holder hub. But they don't sell a drive sprocket that fits it. The hub is a 1"axle bore and 1/4 " keyway . Hub length is 1 5/8" and it is four bolt circle. Any idea where I could get a sprocket thanks
Click to expand...

Yeah northern sucks.

Measure from one bolt hole across to another on the opposite side. Try to accurately measure from the very center to center of these 2 holes.

Do they measure 4 inches?

If so, you'll find some 4 hole, 4" bolt circle sprockets here:

http://willardssmallengines.com/shop/go-kart-parts/sprockets/axle-sprockets/page1.html
http://www.mfgsupply.com/m/c/AZ2165-60.html?id=2ZDBamiz
http://www.mfgsupply.com/m/c/AZ2165-72.html?id=2ZDBamiz
 
Status
Not open for further replies.
Top