go kart
- Thread starter qj8f
- Start date
- Status
Bluethunder3320
New member
- Messages
- 5,677
- Reaction score
- 30
welcome to the forums!
i suggest you look around BMI karts. google the name.
i suggest you look around BMI karts. google the name.
Doc Sprocket
*********
Common as mud. Do a Google search.
anderkart
Moderator
You'll find there's serveral different styles of 1" wheel hubs sold, if your unsure which ones you need try to post a pic of the end of your axle, and then also mesure/post the bolt hole patern in your rims. Some online shops list this rim bolt patern mesuring 2 holes next to each other and then sometimes they want you to measure between 2 across from each other, so it can be kinda tricky ordering the corect ones.
wall gator
New member
hey everyone today ive been tryin to find hubs that would fit a 1inch axle with a 3/4 bore im kind of new here and need the help thanks
need pic is this a steped down axel???? threaded or key way'dead or live axel?
fowler
New member
it steps down to 3/4 or it is a 1 inch axle with a 3/4 thread on each end
Doc Sprocket
*********
So, what you're saying is you need 3/4" hubs, yes?
fowler
New member
just take a pic and post it
clydecanride
New member
I have a couple old Zip Karts and I need the split rims for the rear axle. I haven't had any luck with the couple online vendors I looked at. I'm attaching pics of the wheel and the hub it bolts to. Any help would be great.
Attachments
-
IMG_2287.JPG -
IMG_2284.JPG -
IMG_2285.JPG -
IMG_2286.JPG
Redline-Go-Kart
Kart Master
- Status