Lavastar889
New member
- Messages
- 21
- Reaction score
- 5
At first we just sprayed it with cleaner, that obviously didn't do much, so we unclogged the needle valve, took a small brass piece out with a very small passage(I don't know what it was for), stuck a pin through it to clean it. Then we took out this other small brass thing out that had like 15 tiny holes in the top of it, cleaned it out too. Put it back together and it started, ran, and idled just fine. We came back 4 hours later to find it doesn't even start.How did you clean the carb?
Spray stuff in the hole from a foot away?
or did you take it apart and inspect all the jets. Cleared out the Small Idle Circuit holes in the throat. Blew air through all passages?
Sounds like the idle Circuit is still clogged.