Go Kart Id Help

Status
Not open for further replies.

joejoecart

New member
Messages
6
Reaction score
0
Hi, I am hoping someone can give me some info. There are no marking at all the frame or motor. Any info would be great.
 

Attachments

  • P8050049.jpg
    P8050049.jpg
    89.9 KB · Views: 36
  • P8050050.jpg
    P8050050.jpg
    93.7 KB · Views: 20

joejoecart

New member
Messages
6
Reaction score
0
It is a 2 stroke, but the engine doesn't turn when you pull the rope. I guess the plastic one way pawl is worn out. If i new what brand of motor it is, I could get this thing running. I found two Japanese/Chinese stamps on the steel part attached to the crank. Any ideas?
 

OmgGixxerKart

Just put a 600 in it...
Messages
4
Reaction score
0
Since its not turning you may want to check the sleeve and see if there is a pinch in it because form my experience it happens quite often but if you can spin the crank and the piston rotates than this is not the case. You may want to invest in a name brand motor since getting parts for these is quite easy.

Zach
 

joejoecart

New member
Messages
6
Reaction score
0
I found the starter parts I needed by searching 49cc. You are right. The discoloration is a reflection. Thanks for the help.
 
Status
Not open for further replies.
Top