Hi everyone I recently bought a bcs go fur go kart and have been looking to get it in running condition I need some sort of clutch a shaft and a gear and bearings if anyone could help identify the parts and where to get them it would be greatly appreciated
Go Fur by bcs
- Thread starter GoKarts1
- Start date
Denny
Canned Monster
Jackshaft, 30 series driven, belt. You can try GoKart Supply, BMI, OMB Warehouse, Go Power Sports, AZUSA, MFG Supply or any of the dozens of other parts suppliers. Or you could go the cheap way out and go to the jungle store and get a cheap 30 series TAV II CVT kit and then a Genuine Comet Belt and save a whole bunch of green for gas and oil. Except for the belts the Jungle stuff is every bit as good as the Comet stuff.
When it comes to belts though only the Comet belts are worth buying. You will melt 10 or more cheap belts before the Comet is worn even a little.
When it comes to belts though only the Comet belts are worth buying. You will melt 10 or more cheap belts before the Comet is worn even a little.
BrianD51
New member
You can find "some" things on Amazon if you pay attention to the fine print.
Thanks I really appreciate it I tried finding the info online but couldn’t find anything
You wouldn’t happen to have a picture of the parts would you? I’m fixing this up with my grandpa and he’s stubborn about parts he won’t but it until he has a picture sorry for the trouble
BrianD51
New member
Thanks
gokartdave
Active member
I ordered that set up quite some time ago. I couldn't get that aluminum plate to line up with any of the holes on my engine in a usable spot.
Denny
Canned Monster
The kart may have to be modified to suit. Nothing in our world is exactly a bolt on.
BrianD51
New member
Truer words hath never been spoketh!
gokartdave
Active member
Unfortunately that wasn't possible. I'm thinking it was the brand name of the engine. Anyway I solved the problem. Used all the remaining parts from that same kit except aluminum plate, cover an shaft. Now their in my spare parts cabinet.