GN250 engine in a Drift-2

Status
Not open for further replies.

Wim

Jazz Maverick
Messages
87
Reaction score
0
Location
Oz
Hi fellas you might remember me from such threads as:

DIY 2-speed Gearbox.
http://www.diygokarts.com/vb/showthread.php?t=8890

Anyway, Ive just completed an engine conversion to that Kart. The 2-speed trans from above and 6.5hp clone is out (probably end up in some other odd-ball thing :D ) and a 250cc Suzuki GN engine has taken its place.

Take a look here if yer interested:

http://www.thepixelpump.com/widdershins/gokart.php#gn250conversion

I'm yet to test it in the dirt...
...stay tuned.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
thats gonna have no problem shredding the tires!

ever thought of selling the 2 speed? i bet someone here would buy it.
 

Wim

Jazz Maverick
Messages
87
Reaction score
0
Location
Oz
I kinda scavanged parts off the 2-speed to build this. But I am thinking of putting together a better set of plans and/or adding more detail to my 2-speed build summary so people can feel more confident with DIY.
 

Wim

Jazz Maverick
Messages
87
Reaction score
0
Location
Oz
I took it out for a test run this week.

1st gear is like low range in a 4wd, probably about jogging pace but very torque-y, it can idle-crawl up steep inclines without labouring. 2nd and 3rd are the sweet-spot for offroad fun, I can drop the clutch in the first 3 gears without the engine bogging down. 4th and 5th are best kept for flat open spaces, I'm guessing top speed in 5th is something like ~70km/h... in a kart that's only 6 inches of the ground, with no seatbelt or roll cage. So I probably wont use the upper two gears very much...

...and I thought a commuter bike engine might be a bit mild.

The suspension I added to the front makes a huge difference too, I can ride over uneven ground without needing a kidney transplant afterwards.
 
Status
Not open for further replies.
Top