gearing question???

Status
Not open for further replies.

kartmonster13

New member
Messages
82
Reaction score
0
ok so after looking at the northern tool and MFG supply web sites my TC should have a 10-12 tooth gear for the #35 chain and it has a 9 tooth sprocket on it and is prob for a 40 or 41 chain so i think that was the problem with it chewing up my sprockets now my question now is can i take off the 36 tooth sprocket off of my hard drive axle and use that on the streaker axle and what type of gear ratio would that give me and what speed would i be looking at
 

Attachments

  • 100_4876.jpg
    100_4876.jpg
    147.9 KB · Views: 3
  • 100_4878.jpg
    100_4878.jpg
    105.4 KB · Views: 2

kartmonster13

New member
Messages
82
Reaction score
0
sorry the sprocket on the streaker axle is a 54 tooth and want to swap it to the 36 tooth sprocket from the hard drive axle
 

kartmonster13

New member
Messages
82
Reaction score
0
i am too sorry no i am trying to get a new sprocket for the TC and the replacement one is a 12t now my axle sprocket is a 54t and my hard drive axle has a 36t sprocket i was wondering if i could sap the 54t to the 36t
 

klicky96

New member
Messages
558
Reaction score
1
Location
Sandusky, Ohio
You need to measure by the pitch, not the number of teeth, while determining the size of your chain/pitch. In google, search "Sprocket Pitch Diagram". Go to images, 3rd row down, 3rd picture to the right. It will be a list giving you the size, pitch, length, etc. It is very useful.
 

kartmonster13

New member
Messages
82
Reaction score
0
ok cool i will go check it out im just confused because i know its a #35 chain and the 54t sprocket is for a #35 i will let you know what i figure out thanks for the info
 

kartmonster13

New member
Messages
82
Reaction score
0
9t sprocket pic

this is my problem i cant measure the pitch on this sprocket
 

Attachments

  • 100_4887.jpg
    100_4887.jpg
    60.3 KB · Views: 1

kartmonster13

New member
Messages
82
Reaction score
0
bore on the shaft and sprocket is 5/8 off of the TC
 

Attachments

  • 100_4888.jpg
    100_4888.jpg
    110.2 KB · Views: 0
  • 100_4887.jpg
    100_4887.jpg
    60.3 KB · Views: 0

carter

New member
Messages
390
Reaction score
1
never in my life have I seen a post octuplet, don't you think you could condense that even the slightest? or at the very least delete the link that wasn't the right one?
 

kartmonster13

New member
Messages
82
Reaction score
0
ok got the new 12t sprocket in wow that was fast for mfg supply 3 days so i had to move the motor to give slack on chain i changed the position of the spring to the 2 hole and didnt like it so changed it back and now she runs great and does doughnuts now
 
Status
Not open for further replies.
Top