Gearing question.

Status
Not open for further replies.

B man

Tecumseh FTW!
Messages
2,490
Reaction score
3
Location
Oliver springs,Tn
I was taking my go kart apart for welding when i noticed my sprockets. it has a TC by the way. but it was 10T from the jackshaft to 45T on my axle.

Does this sound right?

what should this gearing be doing? making me faster or slower?
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
also how does a speed calculator take a TC into account?

They don't. And you don't really need to either. Some CVT's top out at 1:1, so it does not alter the numbers at all. Some other ones feature a .90:1 top end, so take your final speed figure and add 10%.

What the CVT really does for you is to allow a taller final ratio without totally dogging in the bottom end. For that info, look up the specs for your CVT. IIRC, the Comet 40 has a 2.43:1 low ratio, so you just factor that into your final ratio to help find an acceptable ratio for takeoff.
 

B man

Tecumseh FTW!
Messages
2,490
Reaction score
3
Location
Oliver springs,Tn
so lets see .18in wheels. 4200RPM. 10Tclutch 45T axle. Gear ratio of 4.5

So im geared for 50mph. I don't doubt this ether lol. seems that fast.

And if i removed the gov. about 5500rpm. it says 65MPH. wow.
 
Status
Not open for further replies.
Top